Radium LED Lamps E27 Dimmable
radium led lamps e27 dimmable for professional retrofits
Radium’s dimmable E27 portfolio is designed for mains‑voltage replacements in hotels, retail, offices, and residential‑style hospitality. Where GU10 optics aren’t required, these A‑type and globe lamps deliver wide, comfortable light with predictable dimming curves and strong color consistency across batches.
Product range and series overview – radium e27 dimmable led bulbs
Form factors: A60/A67 general service, decorative ST64/T45 filaments, and G95/G125 globes. Output bands typically span 600–2,400 lm at 6–18 W, depending on glass (clear vs opal) and LED density. Core CCTs: 2200 K (decor), 2700 K (hospitality), 3000 K (retail/office), 4000 K (back‑of‑house). Color quality options include CRI ≥ 90 SKUs for front‑of‑house and visual merchandising.
Filament styles provide near‑omnidirectional 300–320° distribution; opal A‑types deliver softer vertical illuminance and hide point sources in open shades. Large globes need sturdy lampholders—check socket quality on older luminaires.
Technical specifications and standards
- Electrical: 220–240 V, 50/60 Hz with integrated drivers. Power factor ≥ 0.9 on most non‑dimmable equivalents; dimmable SKUs typically PF 0.85–0.95. THD < 20% typical.
- Dimming: phase‑cut with best results on trailing‑edge (RC) dimmers; leading‑edge (RL) usable where specified. Declare approved dimmer families during submittals; mixed loads on one channel reduce low‑level stability.
- Optical: SDCM ≤ 3 binning for batch uniformity. CRI 80/90 options; warm versions offer strong R9 for reds in hospitality.
- Lifetime: LED packages verified to LM‑80 with projections via TM‑21; project specs commonly cite L70/B50 25,000–35,000 h at tₐ 25 °C.
- Safety & EMC: product design aligns with IEC/EN 62560 (self‑ballasted), performance to EN 62612, emissions EN 55015, immunity EN 61547. Photobiological safety evaluated at luminaire level per EN 62471.
- Environment: ta −20…+40 °C, IP20. For enclosed shades, use SKUs marked “enclosed‑rated” to keep tc within limits.
Practical note: acoustic buzz at very low dim levels almost always points to incompatible wall dimmers or mixed loads; validate on a pilot circuit, then standardize.
Applications and compatibility – radium e27 led dimmable lamp
Use A60 for guest rooms and small pendants (2.4–2.7 m height), A67 for stairwells and higher ceilings, and globes for visible fixtures in lobbies and dining rooms. Filament ST64 suits boutique retail where the lamp is part of the design; opal A‑types serve back‑of‑house and corridors. In luminaires with sealed shades, pick enclosed‑rated SKUs or reduce wattage to control junction temperature.
On legacy dimming banks, isolate dimmable circuits from non‑dimmable to avoid uneven turn‑down. For AV and camera‑visible spaces, verify flicker metrics (Pst LM/SVM) with the intended dimmer hardware.
Integration with other Radium products – radium dimmable led e27 lighting
These lamps sit naturally alongside Radium GU10 accents and linear luminaires. For scene control, place DALI‑to‑phase or 0–10 V gateways upstream of compatible mains dimmers so housekeeping, evening, and presentation modes are repeatable across rooms. Where glare control is critical, combine opal A‑types with Radium shades and baffles to keep luminance comfortable.
Cross‑category planning helps maintenance: unify on one CCT per zone and two lumen packs (e.g., A60 ~800–1,050 lm; A67 ~1,600–2,400 lm).
Selection criteria for B2B clients
- Lumen pack vs mounting height: A60 for standard rooms; A67/high‑lumen for tall corridors and stair cores.
- CCT/CRI policy: lock one CCT per visual zone; use CRI 90 where merchandise or skin tones matter.
- Dimming hardware: prefer trailing‑edge; avoid mixing dimmable/non‑dimmable on one channel; document approved dimmers in handover.
- Thermal envelope: enclosed shades raise tc—use enclosed‑rated lamps or step down wattage.
- Envelope & mass: large globes (G95/G125) need rigid E27 sockets; swap worn lampholders during retrofit.
Procurement often standardizes two SKUs (2700 K filament + 3000 K opal A67) to cover 90% of rooms while keeping spares lean.
Advantages of working with Bankoflamps
- Individual B2B pricing and custom offers tailored to project phases.
- Personal account manager for samples, submittals, и logistics.
- Real‑time stock visibility across EU warehouses.
- Quick quote response (~1 hour) to meet tender windows.
- Fast order placement by EAN/MPN with clean traceability.
- Downloadable, always up‑to‑date price lists for ERP syncing.
- Lead‑time tracking and order status updates for site scheduling.
- Purchase‑history access and analytics to consolidate SKUs.
- Post‑payment (up to 30 days) for trusted clients.
- Consolidated shipment management to reduce freight cost.
Stable pricing with validity dates; we serve France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.