Regulator eNet RF dimming actuator, 1-g
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
131,15 €
This price is valid until 31.12.25
Estimate delivery time at our warehouse (approx.):
2-4 weeks
Technical Information
Item condition |
New |
Manufacture name |
Regulator eNet RF dimming actuator, 1-g |
Brand |
Jung
|
Categories |
Switches
|
Country of origin |
DE |
Harmonized System Code |
8536 5080 00
|
Assembly arrangement |
Basic element |
Method of operation |
Radio frequency (RF) |
Frequency |
50-60 Hz |
Type of load |
Universal |
Nominal voltage |
230 V |
Device width |
0 mm |
Device height |
0 mm |
Device depth |
0 mm |
Packing details
Packing level 1 |
4011377086876 |
Packing level 2 |
4011377086876 |
Other Technical data
Mounting method |
Flush mounted (plaster) |
Halogen free |
Yes |
Connection type |
Screwed terminal |
Material |
Plastic |
Type of fastening |
Other |
Light value memory |
Yes |
Substation input |
No |
RAL-number (similar) |
0 |
Serial dimmer |
No |
Applicable with movement sensor |
No |
Applicable with transmission button |
No |
Applicable with infrared button |
No |
Applicable with presence indicator |
No |
Applicable with button |
No |
Applicable with time switch/timer |
No |
Transparent |
No |
Core cross section |
0.75-4 mm² |
Number of modules (module system) |
0 |
Dimming phase cut-off |
Yes |
Dimming phase cut-on |
Yes |
Min. depth of built-in installation box |
0 mm |
App control via Bluetooth |
No |
Downloads
Description
Regulator eNet RF dimming actuator, 1-g.Controls lighting systems through radio frequency (RF) operation.Designed for universal load compatibility in power systems. Flush mounted (plaster).Halogen free plastic construction.Assembly arrangement:Basic element.Method of operation via Radio Frequency.Dimming phase cut-on and phase cut-off supported.Suitable for resistive and inductive load types.Light value memory enabled during operations. Nominal voltage 230 V, frequency range 50 Hz–60 Hz supported;screwed terminal connection type with core cross section between 0.750 mm² and 4.000 mm² detected as acceptable wiring spec limits specified on this unit design surface integrity unmodified