Technical Information
Item condition |
New |
Manufacture name |
Presence detector, DALI, secondary, 12 m, flat, for flush mounting, wh |
Brand |
Niko
|
Categories |
Motion & Presence Sensors
|
Country of origin |
DK |
Harmonized System Code |
8536 4900 00
|
Mounting method |
Flush mounted (plaster) |
Colour |
White |
Width |
95 mm |
Model |
Presence detector |
Height |
95 mm |
Depth |
5 mm |
Connection type |
Screwed terminal |
Frequency |
50 Hz |
Max. transmission range frontally |
6 m |
Max. transmission range sideways |
6 m |
Scan angle |
360 ° |
Degree of protection (IP) |
IP20 |
Response value luminosity adjustable |
No |
Optimum mounting height |
3 m |
Max. presence range |
113 m² |
Sensor type |
Passive infrared |
Packing details
Packing level 1 |
5413736340855 |
Other Technical data
Halogen free |
Yes |
Creep-under protection |
No |
Voltage type |
AC |
Built-in depth |
90 mm |
With remote control |
Yes |
Diameter |
95 mm |
Built-in width |
77 mm |
Built-in diameter |
77 mm |
Staircase monitoring |
No |
Bridging switch |
No |
Suitable for wireless transmission |
No |
Material quality |
Thermoplastic |
Temperature |
5-40 °C |
Material |
Plastic |
Response value sensitivity adjustable |
Yes |
Dim function with dimmer basic element |
Yes |
Suitable for C-load |
No |
Diameter detection range on floor |
12 m |
Remote operation |
Yes |
HVAC-control |
No |
Constant light control |
No |
Substation input |
Yes |
RAL-number (similar) |
9010 |
With signal unit |
No |
Teach-function for response value luminosity |
No |
Networkable |
Yes |
Forced switch off |
No |
Built-in length |
90 mm |
Impact strength |
IK02 |
With alarm function |
No |
Transparent |
No |
Animal zone |
No |
Surface finishing |
Matt |
Detection angle horizontal |
360 ° |
Suitable for wall mounting |
No |
Number of switching zones |
3 |
With DALI interface |
Yes |
IFTTT support available |
No |
Forced switch on |
No |
Min. starting current |
0 A |
Min. depth of built-in installation box |
90 mm |
Compatible with Apple HomeKit |
No |
Compatible with Google Assistant |
No |
Compatible with Amazon Alexa |
No |
Suitable for ceiling mounting |
Yes |
Anti-bacterial treatment |
No |
Downloads
Description
This presence detector (DALI daylight control, secondary) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with a master to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the secondary detector, though, can be set separately. A maximum of ten secondary detectors can be connected per master. Finishing colour: white Compatible master detectors: 350-41650, 350-41657, 350-41680