Post-top luminaires Cuvia 60 CLO (normal) Lens Anthracite ET 133W 13500lm 70 asymmetric wide (AB2L) IP66 IK09 5 SDCM 8474140

Post-top or bracket-mounted luminaire with flat cover. With an intelligent label for quick access to luminaire information by means of QR code. With self-regulating power reduction via integral evaluation electronics.Reduction of luminaire luminous flux to 50 % for a time period of 7 hours (-2 h/+5 h). The central point of the switch-on duration is defined new on a daily basis . With SLR (Smart Lighting Ready) equipment for retrospective integration of components for light management systems. Standardised Zhaga-compliant bases are at the top on the luminaire head and on the lower cover. The luminaire is designed for the D4i standard and Zhaga/D4i certified. Post-top and bracket-mounted luminaire for mast spigot Ø 76 mm. Inclination angle for post-top mounting 0°, 10°, for bracket mounting -10°, 0° adjustable. Also suitable for applications with masts Ø 42, 48 and 60 mm via reduction pieces to be ordered separately. Mast mounting via two stainless steel fixing screws in accordance with EN 60598-2-3. As MLT version (Multi-Lens Technology), consisting of highly efficient UV and temperature-resistant lens systems in 4-fold configurations. With PMMA cover, clear. With asymmetric wide light distribution. For lighting roads according to P lighting classes. Retrofitting a rear / side shield is possible as an accessory to be ordered separately. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux and light color fixed, with luminous flux stabilization at end of life (CLO). Luminaire luminous flux 13500 lm, connected load 127 W, maximum luminous efficiency of luminaire 106 lm/W. Light colour warm white, correlated colour temperature (CCT) 2700 K, general colour rendering index (CRI) Ra > 70. Colour locus tolerance (initial MacAdam) ≤ 5 SDCM. Further LED light colours available on request. Mean rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Versions with 3-level switch for adjusting various luminous flux options on request. Luminaire body of die-cast aluminium. Surface anthracite coated (DB 703). Highly weather-resistant coating. Sea weather-suitable coating on request. With sulphur-free sealings. The modular luminaire consists of the basis module and optical module. The mechanical and electrical connection of the modules is achieved without use of tools. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK09. Mast available upon request. Windage area fw 0,050 m2. Weight: 8,4 kg. With 8 m long connection cable (NYM, 2 x 1,5 mm2). M20 gland as cable strain relief for cable diameter 6 mm to 12 mm. With electronic transformer, switchable. Control gear unit according to DALI-2 standard (EN 62386). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance Differential Mode / Common Mode: 6 kV / 10 kV. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.