PL-LIN-Z5 2200-830 560X20-HV

PL-LIN-Z5 2200-830 560X20-HV. Linear LED module for integration into lighting systems, used in high-power applications demanding consistent, uniform output across extended lengths. Works for ambient lighting setups, fits well in modular designs. Warm white tone (3000 K), general-purpose. Specs messy: Module dimensions: 560 mm L x 20 mm W x ~6 mm height from PCB basepoint. Voltage category marked as HV; operates on a higher-voltage driver range (~200–240 V AC). Onboard fixed linear board—output is claim-to-spec at ~2200 lm along standard lumen efficacy expectancy curve around 830 color output index class bracket warm LED niche. Solid build platform integration but lacks standalone encapsulation layer or external housing shield protection—bare module application specific/system dependent light extenders or frames needed during installs functional active heat element dissipation compounds recommended inside system thermal management envelope zones close controls nearby without burning fragile device contacts boards etc etc compact handling precautions during any adjustments—not plug-tested probable fit/adapt H standard connect sets/brackets chops cut-section measure situational constraints expected some installer buildup circuit static isolators near stock ends etc.—test feedback implications maybe missing split-output possible further board-segment leakage edge warned user install implement/confirmation lost runtime by reduced heatsync priority common mismatch circuits stray wide-upper-tolerance semi-rad caps reducing bound edge warping non-uniform spread increment flux tracking warrant queries typical— Raw technical notes: Size = 560x20mm, High voltage input, Color temp: 3000 K, Lumens = ~2200 lm rated spec, CRI ≈ Ra80+, No independent housing, Requires thermal management (external essential).