PL-CN50-COB-900-D2W-40D-G1

Used for high-precision lighting applications, modular COB LED integrates seamlessly into systems where compact size and consistent output are required. Provides narrow beam control, suitable for accent or task illumination scenarios. ~ Power consumption rated at 9W max but fluctuates slightly under varied conditions; 40° beam angle, medium-focus light spread optimized by reflector design—tested with acceptable light uniformity across target areas. Driver side connections feel solid, no noticeable voltage spikes during operation tests @ standard specs. Unit emits neutral white (~4,000K), color rendering acceptable for most general-use environments (CRI ~90). Physical dimensions compact: module diameter similar to other CN-series LEDs (~50mm). Build finish sturdy enough; casing doesn't dent easily under moderate handling stress test—material might be aluminum alloy? Thermal pad adhered fine on install site “first fit,” passive cooling seems adequate unless heat rises past stress points ~tops out close to what datasheets imply. Notes: Input voltage range = 18–54V DC. Center luminous flux ~900lm typical output rating ±5%. Thermal pad pre-installed default location ok as-is. Driver recommendation efficiency class II compatible only per label notice plate D2W spec detail matches installation rules provided by manufacturer guidelines sheet pdf ref-inline annotations system-safe approvals CE compliant classification marks verified G1 status adjacent operational notes updated region-specific storage impact cold tolerance minimum thresholds test safe buffer temp -20°C upper +45°C maxclerical motorblock ranges ignored holdover clearance assure units forward batch cross ref code precedent identifiers failure"+