PL-CN111-COB-2800-930UW-40D-G1

Used as primary light source module, works in high-precision lighting setups, compatible with focused beam applications. COB tech enables compact structure and uniform output—efficient for controlled illumination systems. 2800 lm output rating—a good balance between brightness and energy. Color temp consistent at 3000K warm white, indexed to a CRI of 90+, color quality holds steady without flicker. Operates reliably with ~40-degree beam angle; targeted range okay for retail or task-oriented areas. Dimensions tight—CN111 form factor fits well into standard setups but double-check housing requirements. Passive cooling only? Maybe requires additional sink elements depending on long-hour operation. Specs: Voltage input — configured nominally at ~34V DC max cap, typical forward current ~850 mA recommended operating level, wattage peaks around 30W load capacity limits. Mount surface flat enough—not pre-heated-tested for thermal transfer adhesive use yet though seems compatible on preliminary inspection. Technical notes: Bin coded G1 tolerance check passed COE spec, consider extra anti-vibration mount points if used mobile configs-none built-in native shock absorber damping layers/distr), dimensions CN111 standardized-doable clearance minor retrofits possible chassis screws-adjustments axes alignment critical avoid overtight junction stresses especially damped vertical mounts solder pads slightly offset centerlines-makes leadtrimming need case dependent spot optical performance aligns agreed parameters LM79 approximate field deviation acceptable documented references still TBA pending full test-run calibration batch post prod-validator adjuncts relation flux consistency ok vintage fabrication +locked-end final temper processing