Photoelectric sensor XUB1APANM12 Reflex 4m NO
Technical Information
| Item condition | New |
| Manufacture name | Photoelectric sensor XUB1APANM12 Reflex 4m NO |
| Brand | Telemecanique |
| Categories |
Photoelectric Sensors
|
| Country of origin | ID |
| Voltage type | AC/DC |
| Housing material | Plastic |
| Ambient temperature | -25-55 °C |
| Type of switching output | PNP/PNP |
| Type of switch function | Normally open contact (NO) |
| Type of light | Infrared light |
| Transmission range of the safety field | 0 m |
| Type of safety according to IEC 61496-1 | 1 |
| Wavelength of the sensor | 0 nm |
| Degree of protection (IP) | IP65 |
| Sensing mode | Dark switching |
| Rated switching distance | 4000 mm |
Packing details
| Packing level 1 | 3389110148688 |
| Packing level 2 | 3389110148682 |
Other Technical data
| Max. output current | 100 mA |
| Suitable for safety functions | No |
| With time function | No |
| Switching frequency | 500 Hz |
| Number of semiconductor outputs with signalling function | 1 |
| Number of contact energized outputs with signalling function | 0 |
| Number of protected semiconductor outputs | 1 |
| Number of protected contact energized outputs | 0 |
| Type of interface for safety communication | Other |
| Type of electric connection | Connector M12 |
| Rated control supply voltage at DC | 12-24 V |
| Operation agent-safety class | Safety class 0 |
| Setting procedure | Other |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Construction type housing | Cylinder, screw-thread |
| Laser protection class | None |
| Light dot | 0 mm² |
| Max. output current at protected output | 100 mA |
| Min. reflector distance | 1000 mm |
| With monitoring function downstream switching devices | No |
| With restart blockage | No |
| Response time | 1 ms |
| Switching voltage of OSSD at state "high" | 0 V |
| Pre failure notice | No |
| Material of optical surface | Plastic |
| Analogue output 0 V ... 10 V | No |
| Analogue output 0 mA ... 20 mA | No |
| Analogue output -10 V ... +10 V | No |
| Analogue output 4 mA ... 20 mA | No |
| Width sensor | 0 mm |
| Diameter sensor | 18 mm |
| Height of sensor | 0 mm |
| With communication interface analogue | No |
| With communication interface AS-Interface | No |
| With communication interface CANOpen | No |
| With communication interface DeviceNet | No |
| With communication interface Ethernet | No |
| With communication interface INTERBUS | No |
| With communication interface PROFIBUS | No |
| With communication interface RS-232 | No |
| With communication interface RS-422 | No |
| With communication interface RS-485 | No |
| With communication interface SSD | No |
| With communication interface SSI | No |
| Length of sensor | 60 mm |
| Max. switching distance | 5500 mm |
| With reflector | Yes |
| With other analogue output | No |
Downloads
Description
This design 18 single mode (reflex system) photo-electric sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability. 1 LED display allows to identify status of the sensor. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified.
Replaced by
