Phoenix Contact Accessories/spare parts for E-Mobility

In large-scale EV infrastructure, uptime depends on the smallest parts — seals, caps, connector boots, strain-reliefs, and sensor harnesses. Phoenix Contact accessories and spare parts for e-mobility are engineered to restore full system integrity without replacing entire cable assemblies or stations. Below is a detailed guide to what’s available and how B2B buyers can integrate these items into preventive maintenance plans.

Phoenix Contact EV Charging Accessories — Components That Protect the Investment

Phoenix Contact EV charging accessories cover all consumables and support hardware around AC and DC connectors:

• Protective caps & holsters: weather-proof covers for Type 2 and CCS 2 plugs, preventing dust ingress and oxidation.
• Mounting cradles: wall or pedestal holders to secure connectors between sessions.
• Label plates & identification rings: color-coded sets for multi-bay differentiation.
• Cable management kits: spiral reliefs, booms, and strain-relief collars for high-turnover stations.
• Sealing sets: O-rings and gaskets compatible with Phoenix Contact housing polymers.

All parts conform to IEC 62196 and IP54–IP67 protection ratings to ensure compliance after maintenance or field repairs.

Phoenix Contact E-Mobility Spare Parts — Preventive Maintenance Kits

For operators managing fleets of chargers, Phoenix Contact e-mobility spare parts reduce lifecycle cost by simplifying local service.
Each kit can include:

• Connector latch mechanisms and locking springs.
• Temperature-sensor inserts for DC power pins.
• Replacement pilot-contact pins and crimp sleeves.
• Cable-end strain-relief sets for Type 2/CCS 2 heads.
• Cap kits for M12 and signal interfaces.

These items are field-replaceable using standard torque tools and calibration gauges, allowing on-site technicians to restore performance within minutes.

Phoenix Contact Replacement Charging Connectors — Direct Retrofit Options

Phoenix Contact replacement charging connectors are available as complete assemblies (handle + cable pigtail) or head-only units.

• AC Type 2 handles: 16 A / 32 A, straight or angled.
• DC CCS 2 connectors: 200–500 A, air-cooled or liquid-cooled versions.
• Locking latch variants: manual or motorized interlock options for smart stations.
  All units are fully compatible with existing Phoenix Contact EVSE controllers and signal harnesses, ensuring plug-and-play retrofit without software modification.

Phoenix Contact Charging Cable Accessories — Field Support Hardware

Technicians working outdoors rely on Phoenix Contact charging cable accessories for mechanical protection and routing:

• Flexible conduit adapters for pedestal routing.
• Strain-relief bushings to extend cable lifespan.
• Gland sets with pressure-equalization membranes.
• Cable tags and ID markers for OCPP station management.

These elements maintain safe bend radius and prevent micro-fractures in cables exposed to temperature cycles.

Phoenix Contact EV Station Accessories — Operational Add-Ons

In modular charging sites, Phoenix Contact EV station accessories simplify installation and service logistics:

• Mounting plates, frames, and cable holders for cabinet integration.
• Plug locks, RFID housings, and payment terminal brackets.
• Cooling hose fittings for DC dispensers.
• Service panel covers and gland plates pre-cut for M25–M40 feedthroughs.

Such components standardize build phases across multiple stations and allow identical spares for each location.

Phoenix Contact EV Maintenance Kits — Service Standardization

Phoenix Contact EV maintenance kits are structured for quarterly or annual inspection cycles:

• Set of seals, latches, caps, and pilot contacts per 10 connectors.
• Dielectric grease and cleaning swabs.
• Torque charts and inspection checklist per IEC 61851-23
• Optional multimeter probes for insulation-resistance tests

Fleet operators and public-charge owners use these kits to comply with preventive maintenance policies and safety audits.

B2B Procurement Notes

• Specify connector standard (Type 2 / CCS 2) and current class before ordering replacement sets.
• Confirm part compatibility via connector family number printed on the housing
• Maintain spare ratios: typically 2–3 % of total connectors in operation.
• Request batch certificates for safety audits and warranty traceability.
• Include consumable kits (seals, caps) in frame agreements to cut unplanned downtime.

Why Choose Bank of Lamps (Distributor)

• Verified Phoenix Contact sourcing: all e-mobility spare parts and accessories supplied with full manufacturer traceability.
• Centralized EU logistics: rapid replenishment from a single Latvian warehouse to any EU destination.
• B2B flexibility: MOQ optimization, mix-SKU cartons, and phased deliveries aligned to service schedules.
• Technical alignment: wiring and mechanical guidance matched to your station configuration.
• Lifecycle continuity: future-proof support for new connector revisions and upcoming Phoenix Contact charging cable accessories.