PCE Electrical Installation

PCE Mounting Systems – rigid, repeatable installation framework

With pce mounting systems, you get pre-engineered brackets, rails, mounting frames and supports designed for standard electrical installations. Typical features: steel or aluminium profiles 30 × 30 mm or 40 × 20 mm with pre-drilled holes at 25 mm spacing; load rating up to 200 kg per section (depending on model); anodised or powder-coated finish for corrosion resistance — important when mounting gear in damp plant rooms or outdoor enclosures. From a procurement perspective, specifying the exact model (e.g., kit with bracket, M8 anchor set, earthing tab) avoids “one-off” adjustments on site.

PCE Wiring Hardware – secure connections, efficient wiring paths

The category pce wiring hardware covers terminal blocks, DIN-rail components, cable clamps, harness clips, and wire-duct accessories. Key technical specs: clamp openings from 4–12 mm², temperature rating up to 105 °C, UL or IEC approval depending on region; fastening torque values specified in datasheets (e.g., terminal screws 1.2 Nm). Using a standard hardware family means your service teams recognise the parts, spares inventory remains lean, and you reduce error risk when installing cables in control cabinets.

PCE Installation Accessories – field-tested parts for professional install

When you order pce installation accessories, you are looking at base parts like flush or surface mounting boxes, spacer kits for uneven walls, sealing kits for IP-rated enclosures, back-plates with knock-outs, and alignment templates. Important installation tips:

• Use spacer kits when the wall surface is irregular > 3 mm to ensure the plate sits flat.
• Choose sealing kits when passing through walls or ceiling membranes—those maintain IP rating while securing the mount.
• Verify that the back-plate has full earthing continuity; a missing earth tab is often the root cause when panels fail inspection.

PCE Conduit Systems – safe routing for wiring, meets code

With pce conduit systems, you get the means to route power and control cables with mechanical protection, in compliance with wiring regulations. Typical components: rigid PVC conduit 16–32 mm diameter, metallic flexible conduit of 20–25 mm, coupling kits, wall sleeves, expansion joints. Technical check-list: conduit inner diameter must allow pull-through of largest cable + opposes more than 40 % fill; bending radius ≥ 6× conduit diameter; fire stopping collars where penetrating fire barriers; clamps spaced no more than 1 m to support conduit. Proper conduit systems keep your installation safe, maintainable and audit-ready.

Procurement & Logistics – what buyers must lock in

When purchasing PCE installation solutions you should:

• Lock the full kit code (mounting + hardware + conduit) so everything matches in finish, batch and documentation.
• Order project-batch quantity to keep material consistent (finish colour, batch for painted parts, cable hardware batch).
• Check packaging unit: for example mounting rails may ship 2 m lengths in box of 5; wiring hardware may be bulk 100-unit tray.
• Ensure spare inventory: keep 2–3 % extra of brackets, 5–10 % extra of small hardware (screws/clips) for maintenance.
• Confirm distributor provides full traceability and original-manufacturer warranty; ensures you avoid grey-market mismatching components.

Why choose Bank of Lamps

Official European distributor with stock in Latvia
Direct B2B sales across EU (Germany, France, Netherlands, Spain, Baltics)
Full documentation and original manufacturer warranty
Fast dispatch from central warehouse
No project design, no custom solutions — only verified wholesale supply