OT 20/170-240/1A0 1DIM NFC G3

LED driver used for powering LEDs in systems requiring tunable currents and dimming functions. Integrates smoothly with NFC technology for configuration. Designed for modern setups demanding reliability and adaptability. Input voltage: range 170–240 V AC, supports universal mains supplies. Output current adjustable up to 1 Amp via programming, enabling fine-tuned compatibility with connected LED modules or luminaires. Compact housing built to handle standard installations, roughly rectangular shape—dimensions tolerable for tight spaces. Dimming control based on 1DIM protocol. Onboard programmability enabled through near-field communication (NFC), requires external tools or software for tuning parameters effectively post-installation. Technical notes: Constant current adjustment capability programmed via NFC tech, rated power output caps at around ~20W, operating temp range (-25°C to +55°C). Efficiency better than older gen models (G2). Can assist flicker-free dimming w/ appropriate system setup. IP protection level not specified; assume indoor applications suitable unless otherwise tested/referenced/documented in real-world conditions/test bench nearby circumstances end-user trials-specific feedback process chain-linked supply system troubleshooting aligned user paths RFID-chip interface calibration dependent time concerns anticipated debugging environmental stabilization reserves manual clarity absent errors config limited by thermal design Guard bandwidth high ambient reliance open-loop specs predictive aging component approvals fx assembly line matched prediction-query debug type circuit-ready G3-stage adaptive.<|fim_suffix|>