OSRAM Reflector LED spots

OSRAM Reflector LED Spots – LED spotlight reflector lamps for flush & track lighting

Reflector LED spots from OSRAM deliver a directional beam, tighter control over light distribution and lower energy draw compared to traditional halogen reflector lamps. For project engineers and procurement specialists these lamps matter because they affect beam quality, thermal load in downlights, maintenance cycles and retrofit cost. Keywords: osram reflector led spots, osram led spot reflectors, osram mr16 led reflectors, osram directional reflector leds, osram architectural spot lighting.

OSRAM Reflector LED Spots – Typical Applications & Sub-types

OSRAM GU10 Reflector LED (230 V) — Spot lamps that fit standard GU10 holders without extra drivers. Example: 6.9 W lamp replacing a 49 W haloge
Use-cases: retail ceiling downlights, track lighting, meeting rooms.

OSRAM MR16/Low-Voltage Reflector LED (12 V) — Smaller format, for furniture, accent lighting, display cabinets. Example: MR16 LED GL 35 Low Voltage from OSRAM: 3-4.3 W, 396 lm, 2700 K
Use-cases: museum showcases, retail display, hospitality niches.

OSRAM R63/E27 Reflector LED — Larger base lamp (E27) but reflector shape (R63) for architectural spots. Example: 4.9 W lamp, 345 lm, 2700 K, replaces 60 W halogen.
Use-cases: surface-mounted spots, designer pendant fixtures, wall washers.

OSRAM Key Technical Specifications & Standards

• Power ratings: Reflector LED models from about 4.3 W up to 8 W (for GU10 PAR16 range). Example: 6.9 W replaces 49 W hal
• Luminous flux: 345 lm from 4.9 W (R63  Some GU10 models 620 lm at 6.9 W.
• Beam angles: from ~24°/36° narrow spots to 60° floods (depending model). Example data shows 36° and 60° beams. 
• Colour temperature (CCT): typical 2700 K (warm white) to 4000 K (neutral white). Example 2700 K for R63
• Colour rendering (CRI): CRI 80 standard; CRI 90 variants available for high-end needs. Example CRI 90 in R63 listing
• Lifetime: Example: up to 15,000 h in some reflector LED models.
• Standards: LED reflector lamps follow IEC/EN 62560 (self-ballasted LED lamps) plus luminaire compatibility per IEC 60598.
• Dimming compatibility: Many OSRAM reflector LEDs support phase-cut dimming in GU10/E27 format. Example: “dimmable – replaces 60 W halogen”.

OSRAM Reflector LED Spots – Buyer Evaluation & Common Mistakes

What to check:

• Base/supply type (GU10 230 V vs GU5.3 12 V vs E27 230 V) — wrong base = fixture mismatch.
• Beam angle vs space: narrow spot (<24°) for accent; wide flood (>=60°) for general
• CCT and CRI: Ensure consistency across same room (e.g., don’t mix 2700 K and 4000 K).
• Driver/dimmer compatibility: If your fixture is dimmable, the lamp must support phase-cut or trailing-edge dimming.
• Thermal management: Ensure the reflector spot has airflow or is in a suitable housing — high efficacy LEDs still need heat dissipation.
• Btch continuity: For multiple units in one zone, order in one batch to avoid colour shift over time