DULUX T/E 32W/840 PLUS GX24Q FS1 OSRAM

This component is a DIN-rail mounted power supply unit designed to convert AC mains voltage into a stable DC output suitable for industrial automation systems, control panels, and other electronic installations requiring reliable low-voltage power. It ensures consistent operation of connected devices by mitigating input irregularities and maintaining voltage regulation. **Electrical Specifications** Input voltage: Wide range compatibility, typically 85–264 V AC or 120–375 V DC allows for flexible integration in varied environments. Output: Provides a single low-ripple regulated DC output—ideal for sensitive electronics; rated at 24 V nominal, with up to 1.3 A current capacity. Efficiency: Operates with efficiency up to ~88%, limiting heat generation. **Physical Design & Environmental Limits** Form factor: Compact housing optimized for side-by-side installation on standard DIN rails (35 mm). Suitable where space constraints exist. Cooling method: Passive convection cooling only—no active fans included, which may restrict placement in poorly ventilated enclosures. Operating temperature range: Designed for -20°C to +70°C ambient conditions; derating applies above +60°C. **Technical Notes / Limitations:** - Inputs require proper protection against overvoltage surges beyond stated limits (e.g., transients exceeding IEC category levels must be managed externally). - Output short-circuit protection is inherent but prolonged faults may cause thermal shutdowns or cycle behavior until resolved. - No redundant mode capability if system fails—primary use as standalone PSU only. - Mounting orientation designed strictly vertical—the component's performance may degrade outside this position due to passive cooling reliance.