Technical Information
| Item condition |
New |
| Manufacture name |
DULUX L 36W/840 2G11 FS1 OSRAM |
| Brand |
OSRAM
|
| Categories |
Compact fluorescent lamps without integrated ballast
OSRAM Sale
2G11 Light Bulbs
2G11 CFL Compact Fluorescent Lamps
|
| Country of origin* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
8539 3190 00
|
| ETIM |
EC000087
|
| Energy Class |
G
|
| EPREL - European Product Registry for Energy Labelling |
546508
|
| Socket |
2G11 (4-pins) |
| Luminous flux |
2900 lm |
| Total length |
411 mm |
| Colour rendering index CRI |
80-89 |
| Diameter |
17.5 mm |
| Colour temperature |
4000 K |
| Lamp power |
36 W |
| Lamp designation |
T5 |
Packing details
| Packing level 1 |
4050300010786 |
| Packing level 2 |
4050300242224 |
| Packing level 3 |
4050300010786 |
Other Technical data
| Colour |
White |
| Integrated starter |
No |
| Suitable for electronic ballast |
Yes |
| Amalgam technology |
Yes |
| Colour of light |
840 |
| Number of lighting tubes |
1 |
| Colour of light according to EN 12464-1 |
Neutral white 3300-5300 K |
| Average nominal lifespan |
20000 h |
| Weighted energy consumption in 1000 hours |
39.6 kWh |
| Energy efficiency class according to EU regulation 2019/2015 |
G |
Downloads
Description
This component is a compact switching power supply unit designed to deliver regulated DC voltage for low-power electrical systems. It provides stable output necessary for the reliable operation of devices requiring consistent power input without fluctuations.
### Electrical Specifications
Input voltage range: The unit supports a wide input range from 100 VAC to 240 VAC, making it compatible with global power standards.
Output voltage: Converts AC input into precisely regulated 24 VDC – tolerances apply as per datasheet specs.
Rated output current: Maximum capacity up to 1 A under optimal conditions, while maintaining thermal and electrical stability.
### Mechanical & Installation Features
Form factor: Designed with a slim housing—intended for panel or DIN rail mounting configurations. Space-efficient setup possible in systems constrained by enclosure dimensions.
Connector terminals: Screw-type connection points allow secure wiring; additional strain relief may be required depending on cable types used during installation.
#### Technical Notes / Limitations
- Not certified for outdoor use—indoor installations only due to environmental ratings (IP20).
- Operating ambient temperature range limited between -10°C and +50°C; avoid direct exposure to heat sources exceeding this threshold.
- No built-in redundancy features—single point failure risk dependent on system architecture remains unmitigated by design intent.
- Ensure correct polarity when connecting output lines; potential risk of irreversible damage if reversed wiring occurs.