Off-delay timer, 1 NO contact 10A

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

36,90 €

This price is valid until 31.12.25

EAN: 4010312603048

MPN: 61100704

Package: 1

Estimate delivery time at our warehouse (approx.): 2-4 weeks

Technical Information

Item condition	New
Manufacture name	Off-delay timer, 1 NO contact 10A
Brand	ELTAKO
Categories	Push Buttons and Control
Country of origin	CN
Harmonized System Code	8536 5080 00
Mounting method	Flush mounted (plaster)
Function	Operating and release delay
Width in number of modular spacings	0
Number of changeover switches	0
Voltage type of supply voltage	AC
Supply voltage	250 V
1st interval unit	Minutes/hours
2nd interval unit	Seconds/minutes
1st interval	0-12
2nd interval	1-12
Nominal switching current at 250 V AC	10 A
Switch capacity incandescent lamps	2000 W
Number of contacts as normally closed contact	0
Number of contacts as normally open contact	1

Packing details

Packing level 1	4010312603048, 4010312603048
Packing level 2	4010312603048
Packing level 3	4010312603048

Other Technical data

Built-in height	18 mm
Control voltage 1	8-230 V
Type of control voltage 1	AC/DC
Frequency control voltage 1	50 Hz
Switch capacity fluorescent lamp DUO	1000 VA
Switch capacity fluorescent lamp parallel	500 VA

Downloads

Deep link product page

Description

1 NO contact not potential free 10A/250V AC. Standby loss 0.7 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Zero passage switching to protect contacts and consumers. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. 8 to 230V UC universal control voltage, electrically isolated from the 230V supply voltage and switching voltage. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The top rotary switch varies the off-delay time from 1 to 12 minutes. Operating delay settable from 0 to 12 minutes with the lower rotary switch. Function: When the control contact (light switch) is closed the operating delay AV starts (if not set 0 minutes), on time-out the fan is switched on. The set release delay RV (delay time) starts when the control contact opens and if a set operating delay has elapsed. The fan switches off on time-out. This off-delay timer can be controlled by all dimmer switches EUD12 and EUD61 even in the minimum dimming position.