Off-delay timer, 1 NO contact 16A

Order Only

Price (excl. VAT):

37,05 €

This price is valid until 24.12.25

EAN: 4010312602911

MPN: 23100704

Package: 1

Estimate delivery time at our warehouse (approx.): 4-6 weeks

Technical Information

Item condition	New
Manufacture name	Off-delay timer, 1 NO contact 16A
Brand	ELTAKO
Categories	Marking Plates and Enclosures
Country of origin	CN
Harmonized System Code	8536 5080 00
Mounting method	DIN rail
Function	Operating and release delay
Type of excitation	Analogue with single function
Width in number of modular spacings	1
Number of changeover switches	0
Voltage type of supply voltage	AC
Supply voltage	250 V
1st interval unit	Minutes/hours
2nd interval unit	Seconds/minutes
1st interval	1-12
2nd interval	0-12
Nominal switching current at 250 V AC	16 A
Switch capacity incandescent lamps	2300 W
Switch capacity fluorescent lamp inductive	1000 VA
Number of contacts as normally closed contact	0
Number of contacts as normally open contact	1

Packing details

Packing level 1	4010312602911, 4010312602911
Packing level 2	4010312602911
Packing level 3	4010312602911

Other Technical data

Built-in height	58 mm
Control voltage 1	230 V
Control voltage 2	8-230 V
Type of control voltage 1	AC
Type of control voltage 2	AC/DC
Frequency control voltage 1	50 Hz
Switch capacity fluorescent lamp DUO	1000 VA
Switch capacity fluorescent lamp parallel	500 VA

Downloads

Deep link product page

Description

1 NO contact not potential free 16A/250V AC. Standby loss 0.5 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Zero passage switching to protect contacts and consumers. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Control, supply and switching voltage 230V. Additionally 8 to 230V UC electrically isolated universal control voltage. Very low switching noise. Off-delay time settable from 1 to 12 min with the top rotary switch. Operating delay settable from 0 to 12 minutes with the middle rotary switch. Permanent ON and permanent OFF with the bottom rotary switch. Function: When the control contact (light switch) is closed the operate delay AV starts (if not set 0 minutes), on time-out the fan is switched on. The set release delay RV (delay time) starts when the control contact opens and if a set operating delay has elapsed. The fan switches off on time-out. This off-delay timer can be controlled by all dimmer switches EUD12 and EUD61 even in the minimum dimming position.