Murrelektronik Cables and wires

In modern machine and plant installations, the cables and wires linking devices are as crucial as the devices themselves. Murrelektronik cables and wires deliver assembly-ready, field-tested connectivity solutions for industrial automation, control circuits and signal networks. For procurement managers and engineers, choosing the right Murrelektronik industrial cables or control cables means fewer service calls, faster commissioning and lower lifecycle cost.

Scope of Murrelektronik Cable & Wire Solutions

This category covers the full spectrum of connectivity: from heavy-duty power cables and motor leads to sensor/actuator link cords, from shielded signal wiring to long-length spools for bespoke routing. “Murrelektronik signal wiring” and “Murrelektronik control cables” cater especially to automation panels, control cabinets, fieldbus links and machine tool installations. The objective: reliable transmission of power, data and control in harsh environments.

Primary Product Families and Use Cases

2.1 Industrial & Motor Cables

When you inspect the “murrelektronik industrial cables” segment, you will see cables moulded for IP67/68, halogen-free PUR jackets, rated for continuous flex or torsion (robotics, automated lines). For example: motor cables compatible with Siemens S120, pre-wired, moulded with M23 connectors, fully tested to IP67/68. These cables are ideal for servo drives, automated axes or mobile machines where mechanical stress is high.

2.2 Control & Signal Cables

Under “murrelektronik control cables” you’ll find shielded multiconductor cables, for remote I/O, PLC connections, control-panel wiring. These cables often feature PUR or TPE jacket options, cross sections 0.34 mm² to 1.5 mm², and are rated for continuous movement or tray installation. According to their field guide, Murrelektronik offers cable types with IP67/69K rating, lengths from 0.1 m to 100 m.

2.3 Fieldbus, Data & Signal Wiring

When you examine “murrelektronik signal wiring”, you will see fieldbus cables (AS-I, CAN open, DeviceNet, EtherCAT, Profinet) with 360° full shielding, high bend-radius, available as double-ended or single-ended cordsets. These are critical in distributed automation topologies where noise immunity and data integrity are key.

Technical Features & Specifications to Compare

In specifying these cables, you should pay attention to the following parameters:

• Jacket material & environment rating: For outdoors or mobile use pick PUR or TPE (resistant to oils, welding sparks), halogen-free where required. Example: Murrelektronik motor cables are moulded, halogen-free PUR, IP67/68. 
• Ingress protection & mechanical rating: Many Murrelektronik cables are rated IP67/68, sometimes IP69K, which ensures dust-tight and water resistance under immersion or high-pressure jets
• Shielding & signal integrity: For fieldbus or EtherNet cables look for full-shielded 360° designs, CAT5e/6a performance in flexible cables (see field guide).
• Conductor size & current rating: For power cables check AWG size or mm², and whether the cable is suitable for continuous flex or torsion.
• Pre-assembled vs on-site termination: Murrelektronik offers pre-wired cables and spools for custom lengths (“cables by the meter”). 
• Standard compliance: Look for UL/cUL listings (for North America), IEC/EN ratings, cable code numbering as per Murrelektronik’s catalogues. Example: their power connectors comply with IEC 61076-2-111.

In most tenders you’ll compare cables by price per metre, flex-life (cycles to failure), ability to withstand contaminants and ease of replacement. Based on experience, many issues come from using a static cable in a dynamic application — the Murrelektronik range addresses that.

Application Scenarios & Practical Advice

• Machine tools / robotics: Select a motor cable from Murrelektronik’s catalogue moulded with M23 or MQ15 connectors, rated for torsion (e.g., ±720° per metre), IP67/68 and oil-resistant jacket.
• Automated warehouse / intralogistics: Use control cables rated for continuous movement, PUR jacket, shielded where EMC is a factor; opt for cables by the metre so you cut to exact length and reduce waste.
• Panel wiring / control cabinet: Choose signal cables with shielded pairs for EtherNet-IP or Profinet, grill temperature rating suitable for inside cabinet environment, keep spare lengths for future modifications.
• Mobile equipment / outdoor installations: Use fieldbus cables rated IP69K, halogen-free where required (e.g., food-industry, clean-room), double-ended cordsets for faster replacement.

In procurement you must check not only unit price but lead-time, available lengths, spare-stock compatibility (same series over time) and documentation (test certificates, UL listing). One common mistake: picking a cable rated for static installation and then applying it in a mobile, drag-chain environment — leading to early failure.

Why Choose Murrelektronik Cables and Wires

From engineer experience: a cable failure can bring a line to a halt, cause data corruption, create downtime costs far beyond initial savings. Murrelektronik cables are 100 % tested, built for industrial demands, and come with an assured quality background. Because the brand covers power, signal and fieldbus connectivity, you can simplify your procurement footprint — fewer suppliers, fewer SKUs, better stocking of spares. Moreover, their “by the metre” spool option reduces waste and gives you accurate stock levels. The compatibility across lengths, jackets and connector types means you can configure the exact cable length for your site, minimising slack and clutter.

Comparison Block: Standard Cable vs Murrelektronik Premium Cable

For large installations or mission-critical systems, the Murrelektronik approach typically delivers lower total cost of ownership through reliability and fewer service calls.

Bulk Supply & Procurement Advantages

When ordering Murrelektronik cables and wires for your projects, you benefit from full B2B support and supply chain services:

• Volume pricing and tailored offers for your business scale.
• Dedicated account manager to assist with cable specs, stock, custom lengths and documentation.
• Transparent, real-time stock availability across our warehouse and partner inventory.
• Quick online quote requests — often answered within an hour — using EAN/MPN upload lists to minimise manual errors.
• Downloadable, up-to-date price files to support your procurement planning and tendering.
• Lead-time tracking from factory to dispatch so you can synchronise delivery with installation timelines.
• Access to past purchase history and batch traceability — simplifies maintenance planning and warranty claims.
• Flexible payment terms for approved clients (up to 30 days post-payment) to support project cash-flow.
• Consolidated shipments across cable categories (industrial, control, signal) to reduce logistics cost.
• Smart delivery cost estimates shown upfront and a fixed cost before dispatch.
• Stable pricing windows so you can budget confidently for multi-site or multi-phase projects.