mot.det.top 2.20 m Standard KNX System 70 p.white m(lac.)

Motion detector top unit 2.20 m Standard for KNX pure white matt (lacquered) System 70Features:-Installation on bus coupler 3.-Configurable for motion detection (sentinel application) or for room monitoring (detector application).-Evaluation of brightness during active motion detection in sentinel mode. Switching off lights when brightness threshold is exceeded.-Configurable number of motion impulses within one monitoring time in detection mode.-Digital motion detection via 2 PIR sensors.-Sensitivity of motion detection can be parameterised separately in steps for the PIR sectors.-Integrated brightness sensor for determining ambient brightness.-Adjustment of sensitivity via a dial on the device.-Indication of motion detection (permanent or only during walking test).-One function block can be configured.-Function block for the "sentinel", "sentinel with switch-off brightness" or "detector" application configurable.-Two output communication objects are available to the function block which are transmitted to the KNX via the switching and control commands.-Configurable functions: switching, staircase function, dimming value transmitter, scene auxiliary unit, temperature value transmitter, brightness value transmitter, operating mode changeover, switching with forced setting.-Switchover of the operating mode (OFF / AUTO / ON) during ongoing operation through local operation or via communication object through local operation at other motion detectors for KNX using pushbutton sensor for KNX or visualisation.-In brightness-independent operation, the function block can determine the time span after a previous movement and transmit it to the KNX via a communication object. This function allows for simple monitoring of movements,for example of persons in assisted living residences or in a retirement home.-Functionality of motion detection adjustable for the "sentinel" or "sentinel with switch-off brightness" application.-For the "sentinel" or "sentinel with switch-off brightness" applications, the device can be used as a single device, main unit or auxiliary unit.-Walking test function to help in planning and adjusting the PIR detection range.Notes:-The motion detector is not suitable for alarm messages in VdS-compliant alarm systems.-Also suitable for mounting height of 1.10 m (reduced detection range).