Modular Change-over Switch 4x40 A
Technical Information
| Item condition | New |
| Manufacture name | Modular change-over switch 4x40A |
| Brand | Hager |
| Categories |
Switch Disconnectors
|
| Country of origin* | CN |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmonized System Code | 8536 5011 00 |
| ETIM | EC000216 |
| Rated permanent current Iu | 40 A |
| Number of poles | 4 |
| Rated operating voltage | 380-415 V |
| Degree of protection (IP), front side | IP20 |
| Version as main switch | Yes |
| Version as safety switch | Yes |
| Version as maintenance-/service switch | Yes |
| Rated short-time withstand current lcw | 1.26 kA |
Packing details
| Packing level 1 | 3250613140557, 3250613140557 |
| Packing level 2 | 3250613140557 |
| Packing level 3 | 3250613140557 |
Other Technical data
| Number of auxiliary contacts as normally open contact | 0 |
| Number of auxiliary contacts as normally closed contact | 0 |
| Conditioned rated short-circuit current Iq | 50 kA |
| Number of auxiliary contacts as change-over contact | 0 |
| Number of switches | 1 |
| Interlockable | Yes |
| Motor drive integrated | No |
| Type of electrical connection of main circuit | Screw connection |
| Version as emergency stop installation | No |
| Type of control element | Short thumb-grip |
| Rated operation power at AC-23, 400 V | 18 kW |
| Colour control element | Grey |
| Suitable for floor mounting | Yes |
| Suitable for front mounting 4-hole | No |
| Suitable for front mounting centre | No |
| Suitable for distribution board installation | Yes |
| Suitable for intermediate mounting | No |
| Max. rated operation voltage Ue AC | 415 V |
| Motor drive optional | No |
| Voltage release optional | No |
| Device construction | Built-in device fixed built-in technique |
| Rated permanent current at AC-21, 400 V | 40 A |
| Switching power at 400 V | 26 kW |
| Version as reversing switch | Yes |
| Rated permanent current at AC-23, 400 V | 40 A |
| Degree of protection (NEMA) | Other |
Downloads
Description
**Component Function:** This component is designed to regulate electrical current within a circuit. Its core function is to provide stable performance by maintaining specified voltage levels, filtering noise, or protecting downstream components from irregularities in the system. **Technical Categories:** **Electrical Characteristics:** Rated for operation within standard electrical parameters suitable for low-power systems. Frequency tolerance depends on input stability—performance may degrade under high harmonic distortion. Compatible with DC configurations; ensure polarity match during installation. **Physical Design and Compatibility:** Compact housing enables integration into constrained spaces without additional mounting hardware. Lead terminals fit typical connector slots—some modification may be required for non-standard setups. Temperature ratings align with standard operational ranges but reduce lifespan if exposed consistently near max thresholds. **Technical Notes/Limitations:** - Rated voltage must not exceed manufacturer-defined limits; exceeds tolerance at higher threshold levels. - Operation outside of recommended temperature range reduces efficiency over time. - Not suitable for high-frequency circuits exceeding specified bandwidth capacities—risk of failure increases exponentially beyond rated performance metrics. - Lead length incompatible with custom solder points over extended distances without additional rework measures applied first.
