Schneider Electric MOD.CONT. 40A 2B 230V 50HZ 40 amp contactor
Technical Information
| Item condition | New |
| Manufacture name | MOD.CONT. 40A 2B 230V 50HZ |
| Brand | Schneider Electric |
| Categories |
Assembly Accessories and Parts
|
| Country of origin* | FR |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmonized System Code | 8536 4900 00 |
| Rated operating voltage | 0-250 V |
| Voltage type (excitation voltage) | AC |
| Voltage type (operating voltage) | AC |
| Degree of protection (IP) | IP20 |
| Rated operation current | 40 A |
| Rated excitation voltage | 220-240 V |
Packing details
| Packing level 1 | 3389110641905 |
Other Technical data
| Built-in depth | 62.5 mm |
| Width in number of modular spacings | 0 |
| Utility category | 7 |
| Max. incandescent lamp load | 5100 W |
| Max. load fluorescent lamp | 2200 VA |
| Max. load fluorescent lamp (Duo circuit) | 1800 VA |
| Max. load fluorescent lamp (parallel compensated) | 1600 VA |
| Slider for hand switch | No |
| Additional equipment possible | Yes |
| Number of contacts as normally closed contact | 2 |
| Number of contacts as normally open contact | 0 |
Description
Schneider Electric MOD.CONT. 40A contactor used for switching electrical circuits, designed for applications needing reliable control of loads. Handles 40 amps load current, operates at 230V AC with a frequency of 50Hz. Critical for automation and motor control systems where high-current handling is required.
Compact design, modular construction for easy integration into panels or cabinets. Dimensions not confirmed here but standard Schneider footprint should apply—verify panel space before deployment. Double-pole (2B) configuration allows concurrent switching of two lines.
Non-latching type; only remains engaged while signal applied to coil terminals. Coil voltage rated specifically for 230V AC operation; input lower or fluctuant will reduce reliability/pass fail rates during actual use cycles in field conditions.
--- Technical notes ---
Rated current: 40A., Rated voltage: 230V AC., Bipolar configuration (2B)., Frequency: Runs on standard EU mains at ~50hz., Manufacturer timing spec unknown currently - avoid fast cycling until tested-load spec sheet may clarify values later