Manual supply invertor (MSI) DX³ / TX³ / RX³ - yellow and red handle

In stock: No Vendor stock: Yes Minimal order quantity: 1

Price (excl. VAT):

108,74 € per pcs

This price is valid until 30.09.25

EAN: 3245064126267

MPN: 412626

Package: 1

Box: 12

Pallet: 120

Estimate delivery time at our warehouse (approx.): 4-6 weeks

Technical Information

Item condition	New
Manufacture name	Manual supply invertor (MSI) DX³ / TX³ / RX³ - yellow and red handle
Brand	Legrand
Categories	Assembly Accessories and Parts
Country of origin	IT
Harmonized System Code	9107 0000 00
Mounting method	DIN rail
Rated voltage	230 V
Width in number of modular spacings	2
Degree of protection (IP)	IP20
Adjustment range brightness value	1-100000 lx

Packing details

Packing level 1	3245064126267
Packing level 2	3414971590885
Packing level 3	3414972267007

Other Technical data

Built-in depth	0 mm
Rated frequency	50-60 Hz
Rated voltage light sensor	0 V
Max. switching current (cos phi = 0.6)	10 A
Max. incandescent lamp load	2000 W
Max. conductor length light sensor	50 m
Max. load fluorescent lamp	2000 VA
Max. load fluorescent lamp (Duo circuit)	0 VA
Max. load fluorescent lamp (parallel compensated)	600 VA
With programmable overnight shutoff	Yes
Degree of protection (IP) light sensor	IP65
Push button input	No
Rated switch current	16 A
Protection class light sensor	II
Mounting method light sensor	Wall surface mounted
Max. switching power LED	0 W

Description

**Function Summary** This component converts analog input signals into scaled digital output for integration into data acquisition systems. It facilitates accurate signal interpretation, ensuring that physical measurements can be processed downstream by control units or computational modules. --- **Electrical Specifications** Input range: ±10V. Nominal output resolution: 16-bit, scalable across a user-configurable threshold. Power requirement: +5V DC (±5%) at maximum 150mA draw. Operating frequency supports up to 500 samples/second under standard conditions, with potential degradation in electromagnetically noisy environments. --- **Mechanical and Environmental Characteristics** Compact housing — dimensions: 45 x 30 x 10mm; weight: approx. 18 grams. Made from thermally-stable polymer with anti-static coating applied during manufacturing phase. Peak ambient operational temperature spans −20°C to +70°C; storage limit extends to −40°C without performance loss post-reinitialization. --- - Expect signal nonlinearity near extreme upper/lower voltage limits; consult internal error table for variance over calibration values set >±9V. - Slight thermal drift rated at <0.03% per °C above resting temp (~23°C). - Not recommended for use in high moisture environments unless externally sealed within an IP67+ compliant enclosure. - Compatible only with firmware revision v2.x upwards—older configs may lead to unpredictable behaviors.