Kontakti un pakalpojumi
+371 22 084 444 [email protected]
Kontakti Par mums Piegāde Brands
Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
SENSA MRE DDP HIBAY - Passive Infrared detector image 1
SENSA MRE DDP HIBAY - Passive Infrared detector image 2
SENSA MRE DDP HIBAY - Passive Infrared detector thumbnail 1
SENSA MRE DDP HIBAY - Passive Infrared detector thumbnail 2
Thorn

SENSA MRE DDP HIBAY - Passive Infrared detector

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
280,50 €
Šī cena ir spēkā līdz 24.12.25
EAN: 5037319228806
MPN: 96601982
Iepakojums: 1
Paredzamais piegādes laiks mūsu noliktavā (aptuveni): 4-6 weeks

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums SENSA MRE DDP HIBAY - Passive Infrared detector
Zīmols Thorn
Kategorijas Bus System Devices (KNX/Modbus)
Izcelsmes valsts GB
Autobusu sistēma KNX No
Aizsardzības pakāpe (IP) IP44

Iepakojuma informācija

Iepakojuma līmenis 1 5037319228806

Citi tehniskie dati

Autobusu sistēmas radio bieži No
Autobusu sistēma Powernet No
Autobusu sistēma LON No
Autobusu sistēma KNX radio No

Lejupielādes

DOC CE deklarācija (CE atbilstības deklarācija)

Apraksts

The SENSA MRE DDP HIBAY recessed PIR Presence/Absence Detector provides automatic control (on/off switching and dimming) of lighting loads, with optional manual control. It can be used on DSI/DALI digital dimming ballasts over 1 or 2 channels (1 dimming + 1 switching). The dimming channel of the detector can be used to control the light output of luminaires that are fitted with dimming ballasts. The detector measures the overall light level in the detection area and calculates the correct output for the luminaires, to achieve a pre-set lux level (maintained illuminance). The switching channel of the detector can either be used to isolate the supply to the dimming ballasts (saving on the standby current of the ballasts) or to switch a separate channel of standard, non-dimming luminaires.An integral sensitivity adjustment allows the detector to be fine-tuned to its environment. This detector allows flush mounting into a ceiling tile, or surface mounting using a detector back box.The SWITCHLITE MRE SLD HIBAY detector is suitable for HiBay application up to 17 metres.