Technical Information
| Prekės būklė |
Nauja |
| Gamintojo pavadinimas |
SIPLUS S7-1500 DQ 16x24VDC/0.5A HF |
| Prekės ženklas |
Siemens
|
| Kategorijos |
PLC Units & I/O Modules
|
| Kilmės šalis |
DE |
| Suderintos sistemos kodas |
8538 9091 00
|
| Skaitmeninių įvesčių skaičius |
0 |
| Skaitmeninių išvesčių skaičius |
16 |
| Tiekimo įtampos tipas |
Nuolatinė srovė |
| Išvesties srovė |
0.5 A |
| Skaitmeninės išvesties tipas |
Tranzistorius |
| DC tiekimo įtampa |
20.4-28.8 V |
| Leistina išvesties įtampa |
0-28.8 V |
| Konfigūruojamosios skaitmeninės įvestys |
No |
| Konfigūruojamosios skaitmeninės išvestys |
Yes |
Pakavimo informacija
| Pakavimo lygis 1 |
4047618071127 |
Kiti techniniai duomenys
| Plotis |
35 mm |
| Aukštis |
147 mm |
| Gylis |
129 mm |
| Įvesties srovė esant 1 signalui |
0 mA |
| Pritaikytas saugumo funkcijoms |
No |
| Signalų apsikeitimo laiko delsa |
0.1 ms |
| Perteklumas |
Yes |
| Galimos apsaugos nuo trumpo jungimosi išvestyse |
Yes |
| Apsaugos nuo sprogimo kategorija, taikoma dulkėms |
Nėra |
| Papildomas operacijos vykdytojas (Ex ia) |
No |
| Papildomas operacijos vykdytojas (Ex ib) |
No |
| Išvesties įtampos tipas |
Nuolatinė srovė |
Aprašymas
SIPLUS S7-1500 DQ 16x24VDC HF TX rail based on 6ES7522-1BH01-0AB0 with conformal coating, -40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), digital output module, 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. Just like the CPU, the digital output modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your digital signals are reliably output.