PB sens.4.55 Plus 2-g/4-g KNX white

Pushbutton sensor 4.55 Plus, 2-gang/4-gang for KNX white Features:-Pushbutton sensor with integrated bus coupler, available in 1-gang/3-gang or 2-gang/4-gang variants, depending on the chosen rocker sets.-Pushbutton sensor with integrated display for displaying functions and status.-Rocker function or button function can be set for each operating surface.-Integrated temperature and humidity sensor.-Integrated proximity sensor, transmission of a telegram when approached.-Integrated orientation LED.-Alarm message with sound and warning (text).-User-defined colours for text and icons.-Screensaver that can show up to four elements (time, date etc.) on the display.Rocker function-Switch (ON, OFF, CHANGE), dimming, scene auxiliary unit, blind and controller auxiliary unit.-Differentiation between long or short button press.-Dimming mode, start/stop or dimming in stages.-Retrieve/save scenes.-Controller auxiliary unit for operating mode switchover (comfort, standby, night) or setpoint adjustment.Button function-Switch (ON, OFF, CHANGE), dimming, RGB switching/value transmission, RGBW switching/value transmission, colour temperature switching/value transmission, value transmitter, scene auxiliary unit, blind, shift register, 4-channel operation and colour temperature adjustment.-Dim colour temperature: this function is only available with the 2-gang, 3-gang and 4-gang pushbutton sensors.-RGB dimming. This function is only available with the 3-gang and 4-gang pushbutton sensors.-RGBW dimming. This function is only available with the 4-gang pushbutton sensor.-Differentiation between long or short button press.-Dimming mode, start/stop or dimming in stages.-Retrieve/save scenes.-Value transmitter (1-bit, 2-bit, 4-bit, 1-byte, 2-byte, 4-byte)Two zero-voltage contacts-Connection of a Gira remote sensor (predefined values) or an NTC temperature sensor or switch, button, leakage sensor and condensation sensor.-Function: Response when closing or opening (ON, OFF, CHANGE) the contact, scene auxiliary unit (retrieve/save), string transmission (14-byte) and differentiation between long or short button press.Display properties-Configurable colour display with text and/or icons.-120 different icons can be selected.-Display brightness can be set to normal/night mode.-The lighting ambience can be set via the submenu.Notes:-KNX Data Secure compatible.-Configuration and start-up of the device from ETS 5 version 5.7.7 or higher or ETS 6 version 6.3 or higher (recommended).Scope of supply:-KNX connection and junction terminal included in the scope of delivery.-3-wire cable set included with delivery.-Support ring included with delivery.