Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 2
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 2

KNX-RTC FM/PI W.BTN.INTER.4F TPM PW SYSM

Tik užsakymas
EAN: 4042811092795
MPN: 616819
Pakuotė: 1
Kaina (be PVM)
245,03 €
per unità
Quantità minima d’ordine: 1
Numatomas pristatymo laikas į mūsų sandėlį: 4-6 weeks
Prezzo valido fino al 24.12.26 o fino a esaurimento scorte

Informazioni tecniche

Prekės būklė Nauja
Gamintojo pavadinimas KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM
Prekės ženklas Merten by Schneider Electric
Kategorijos Magistralinės sistemos įrenginiai (KNX & Modbus)
Kilmės šalis* DE
* Faktinė kilmės šalis gali skirtis priklausomai nuo pristatymo partijos. Norėdami patvirtinti konkrečią kilmės šalį, susisiekite su savo paskyros vadybininku.
Suderintos sistemos kodas 9032 1080 00
ETIM EC001101
Kompleksinio bloko išdėstymas Pagrindinis elementas su centrine dengiamąja plokštele
EIB / KNX magistralės sistema Taip
Magistralės sistemos radijo dažnis Ne
„Powernet“ magistralės sistema Ne
Įtraukta magistralės jungtis Taip
Kitos maršrutinės sistemos Nėra
LON magistralinė sistema Ne
KNX radijo magistralės sistema Ne
Dvikryptis radijas Ne

Pakavimo informacija

Pakavimo lygis 1 4042811092795

Kiti techniniai duomenys

Montavimo metodas Apatinis sluoksnis (tinko)
Spalva Baltas
Paviršiaus apdorojimas Neapdorotas
Su ekranu Ne
Medžiagos kokybė Termoplastikas
Skaitmeninių įvesčių skaičius 0
Medžiaga Plastikinis
Su apsauga nuo vagystės / išmontavimo Taip
Rankinis reguliuojamojo taško nustatymas Taip
Galima lygiagreti paslauga Ne
Buvimo mygtukas Taip
RAL numeris (gretimas) 9010
Saugos laipsnis (IP) IP20
Su LED rodmeniu Taip
Permatomas Ne
Paviršiaus tipas Kilimėlis
Su vietine operacija Ne
Temperatūros valdymo klasė (būdas) IV
Rezervinės energijos sąnaudos 0 W
Mažiausias įmontuoto įrenginio gylis 46 mm

Aprašymas

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface. For System M. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. With integrated bus coupler. The bus is connected using a bus connecting terminal. Functions of the room temperature control unit: Controller type: 2-step control, continuous PI control, switching PI control (PWM). Output: continuous in the range 0 to 100% or switching ON/OFF. Controller mode: Heating with one controller output. Cooling with one controller output. Heating and cooling with separate controller outputs. Heating and cooling with one controller output. 2-step heating with 2 control outputs. 2-step cooling with 2 control outputs. Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection. Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel. Presence push-button functions can be parameterised/switched off. Valve protection, controller disable. Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor. Output voltage: 5 V (SELV). Output current: max. 0.8 mA. Max. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m. Material: thermoplastic classy matt. Colour: polar white.