Kontaktai ir paslaugos
+371 22 084 444 [email protected]
Kontaktai Apie mus Pristatymas Brands
Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
DCS btn I/F 2-g Door communication image 1
Gira

DCS btn I/F 2-g Door communication

Tik užsakymas
Kaina (be PVM):
38,60 €
Ši kaina galioja iki 28.02.26
EAN: 4010337210009
MPN: 121000
Pakuotė: 1
Numatomas pristatymo laikas į mūsų sandėlį (apytiksliai): 4-6 weeks

Technical Information

Prekės būklė Nauja
Gamintojo pavadinimas DCS btn I/F 2-g Door communication
Prekės ženklas Gira
Kategorijos Door Entry Systems
Kilmės šalis* DE
* The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager.
Suderintos sistemos kodas 8542 3190 00
Funkcija Praplėsti

Pakavimo informacija

Pakavimo lygis 1 4010337210009
Pakavimo lygis 2 4010337210009

Kiti techniniai duomenys

Plotis 0 mm
Aukštis 0 mm
Gylis 0 mm
Instaliacinis metodas Šynos sistema
Modulinių tarpų skaičius plotyje 0

Aprašymas

DCS button interface, 2-gang Features: The DCS button interface, 2-gang is used to implement a zero-voltage button signal on the Gira door communication BUS. The DCS button interface has two mutually independent inputs for the connection of zero-voltage buttons. The inputs can either be used for triggering a switching action (e.g. switching lights) via a switching actuator or flush-mounted switching actuator, or it can be assigned to a home station. The DCS button interface is intended for installation in a device box behind a conventional button. Notes : The button is connected via a 3.wire connection line which is approx. 20 cm long. This connection line can be extended to a maximum of 5 m. If the button interface is assigned to a home station, the two inputs have differing functions: Input 1 triggers a floor call. This input is required when only a two-wire cable is available for connecting a home station including the floor-call button (e.g. when retrofitting an existing door intercom). Input 2 triggers a door call. This input is required when the automatic door opener of the home station is to be triggered via a mechanical button.