Technical Information
| Prekės būklė |
Nauja |
| Gamintojo pavadinimas |
Connected single switch, base, 10 A, 71 x 71 mm, screw fixing, Zigbee® |
| Prekės ženklas |
Niko
|
| Kategorijos |
Bus System Devices (KNX/Modbus)
|
| Kilmės šalis* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Suderintos sistemos kodas |
8536 2010 00
|
| EIB / KNX magistralės sistema |
No |
| Įtraukta magistralės jungtis |
No |
| LON magistralinė sistema |
No |
| KNX radijo magistralės sistema |
No |
| Dvikryptis radijas |
No |
Pakavimo informacija
| Pakavimo lygis 1 |
5413736368392 |
Kiti techniniai duomenys
| Montavimo metodas |
Apatinis sluoksnis (tinko) |
| Nustatyta srovė |
10 A |
| Išeigos galia |
2300 W |
| Nominali operacinė įtampa |
230 V |
| Magistralės sistemos radijo dažnis |
No |
| „Powernet“ magistralės sistema |
No |
| Maks. perjungimo srovė |
100 A |
| Kitos maršrutinės sistemos |
NHC |
| C apkrova |
No |
| Prijungiamas prie skirtingų fazių |
No |
| Lokali operacija / rankos operacija |
Yes |
| Saugos laipsnis (IP) |
IP20 |
| Su LED rodmeniu |
Yes |
| Modulinis praplečiamumas |
No |
| Nuimamas magistralės (šynos) modulis |
No |
| Mažiausias įmontuoto įrenginio gylis |
40 mm |
Atsisiuntimai
Aprašymas
The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. Please note that you cannot add a LED lighting unit to the conventional push button when you use it as an extension to Zigbee® connected devices. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Nik