LFP800S-G5-927-10 C

LFP800S-G5-927-10 C. Light output module for linear applications, flexible ribbon-style format. Acts as primary illumination strip in layered lighting setups or custom-fit spaces. Designed for integration with compatible driver units and surface mounts — modular light element with adaptable temp control potential. Dims approx 800 mm in total length, low-profile housing, adhesive-backed installation surface on underside but requires smooth prep area for max durability during long-term use. Runs on regulated LV DC input (24V). Rapid cutoff if supply voltage exceeds spec range — stability critical in longer chains. Junction points solder-ready only; no push connectors included, manual system extension needed. Power draw: max ~10 W per meter (nominal operating), color temp calibrated at ~2700K warm-white output but could shift slightly depending batch variance. CRI advertised as "min 90"; consistent enough unless pushed on brightness extremes past rated limits. Technical notes: Input voltage limited to 23–25V DC range max, warm white color tone approx ±100K tolerance, luminosity spec'd at ~850 lm/meter when fresh, can sustain slight condensation exposure from ambient humidity occurrence not submerged direct moisture, weight negligible @ under ~90 grams/unit ribbon measured All other tolerances rely external specs provided driver supplier gallery end assembly construction full material backup unspecified accurate rating may need confirmation bank fixture conduit conduit flap edge trim failure potential stress high-temp full ribbon lengths beyond segment core exactly >230mm threshold repeat test suggest calibration-switch infrastructure verify electric better ('custom setup trail') adapter claims damage faults risk-test conduct ripple safeguard Research likely alternative QLabel-specific traceback check disaster prep configuration guarantee** non Do above contrad선 tab-end wiring extensa bracket summary thereafter.