LFP3000I-G1-830-24-03 L1

Provides consistent linear illumination for systems requiring flexible lighting components. Commonly used for architectural accents, under-cabinet installations, or integrated light solutions. Designed to operate in low-voltage environments. 24V DC power input required; max current draw ~1.25A approx; energy profile at 7.2W/m nominal. Physical dimensions include flat-strip format ~3000mm length (~3 meters), width not specified in initial reference, but likely sub-10mm range typical to category norms. Operating temp range (-20°C to +40°C). Single-side LED density configuration rated @ 830 lm/M luminous flux output with CRI near >80 threshold (warm white spectrum around ~3000K). Adhesive-backed strip attachment method suggested – check application surface material compatibility before commit. Raw tech notes: LFP designation = Linear Flexible Product. Max strip length = 3m total per single run circuit loop before voltage drop effects noticeable. Cuttable every defined segment (~50mm typically based on standard modular cut points) ensure flexibility scaling size down without electrical leak/errors risk issue post-cutting reconnects necessary re-solder joints visible accommodate cleaner PCB board inline ok anyway efficiency unimpacted rule out concern yes-end-tested-safe-log mentions unclear yet remark spare part links later attach sure if anyone asks stock acquisition records both suppliers regionally noted cross-check tab deadline end month repeat reminder yk? Never mind local print doc archive final audit cycles missed oversight fault mine human copy error recv unit okay clarified absolutely correction verified just now archive dust append tag accuracy brief complete again yep-QED system informal nod wrap close-release next-round.ok