LFP1200S-G5-935-10 C

LFP1200S-G5-935-10 C. Light delivery unit, designed for integration with modular LED illumination systems. Functions as low-voltage flexible lighting ribbon – application in linear accent or task lighting setups, typically indoors or protected environments. 12V DC input, current rating dependent on length segmentation – base strip measured at ~1.2m draws 900-950mA nominally (confirm; runtime variability noted). Requires stable power supply, no integrated regulation features onboard (external drivers mandatory). Length adjustment allowed by marked cut points (~50mm intervals). Dimensions: slim build approx width 10mm thickness <2mm material feels like silicone composite housing encapsulated PCB circuit tracks. Surface-mount LEDs spaced evenly (approx pitch 15-16mm), thermal dissipation moderate but consider airflow if closely mounted to heat-sensitive substrates/surfaces. Looks rated for CRI ~93+ spectral range tuned near 3500K warm neutral white output operational max lumen per meter range stated ±1200–1250 lm/m efficiency varies load/regulation stability tested intermittently-value not locked in yet exact spec subject to recheck during lab tests/deployment cycles. Technical notes: Single-sided adhesive backing pre-applied for rapid mounting to smooth surfaces light adhesion only**-better reinforcement recommended secondary fixtures, Flexible substrate bend-radius typical under installation stress doesn’t exhibit immediate fracture risks, IP Rating unspecified no water-resistant claims weatherproofing might require external sealing solutions inquiry needed, Operation temp ambient advised ~(-20°C) to (+40°C); behavior untested beyond values above threshold inconsistencies may occur over lifetime exposure operating extremes