LFD400T-G2-930-10

Part of linear lighting system, used for accent or general illumination. Compatible with installations needing dynamic flexibility in tight spaces or long runs. Function optimized for interior use, mostly decorative but reliable enough to supplement task lighting. 45W max load, DC power input required—12V critical operating threshold here but capable of varying in low-output applications within margin handling limits (ensure pairing with certified driver). Color rendering index 90+ makes it suitable for areas demanding accuracy in visible light reproduction; warm white tone, 3000K range ensures pleasing ambiance when not high-exposure intensity sought. Encased strip design—400mm length by default unit; second-gen (G2 model classification) noted structural reinforcement against bending fatigue over extended ops. Max installation curvature tighter radius clarified post stress tests: approx ~15° before luminal performance reduces peripheral edges >20%. Technical notes: Width 10mm, Height 2.8mm thick, Nominal luminous flux quoted @ ~900lm/m, IP rating unspecified here-presumed indoor-only, Solder pad leads positioned every module increment edge-base strip tail end sections accessible clamp terminals included adapter-separated screwdriver ports minimized, Temperature spectrum functionally viable (-10°C up till standard peak max marked at +50°C deploy cautiously beyond thresholds impact longevity operational stability measurable trade-offs manifest fast cycles progressing heat-linked junction degradation metrics surpass ~11-25hr ranges repetitive-tracked phase failures data log separate appendix revision complete pending audit tag auto-backup restored.#