LFD400S-G1-927-06 V2

Used for architectural lighting setups requiring flexible light strips in controlled environments. Emits warm, consistent 2700K illumination, designed for custom integrations where compact light delivery is critical. Requires DC voltage input — 24V nominal. Current draw variable depending on length (approx. ~5-6W/m). Not self-powered, external driver mandatory. Cuttable sections every 100mm; tolerances tight but fine for precision installs. Binding process fiddly — solder pads close alignment to edge. Semi-transparent hose-like silicone casing encases LED circuitry, IP20 grade not waterproof (indoor-only use). Strip width approx ~10mm, thin profile easy to route around corners/slim channels. V2 iteration slight tweaks vs Gen1 version: optimized PCB trace layout + minimal improvement on thermal management (not massive difference). Technical notes: Voltage supply required: 24V DC, Power consumption estimate per meter: ~5W/6W based on configuration, Color rendering index CRI >90, Light color temperature rated at slightly warm white: 2700 Kelvin, Max length before significant voltage drop without booster advised ~5 meters, Driver compatibility checklist needed before deployment/install, Adhesive backing included—moderate hold only over short durations requires fix alternative long-term setups, Solder points reinforced variably by manufacturing batch quality-check inconsistencies possible points failed testing history marginal cases observed Gen1—unknown if resolved reliably yet Gen2 data limited debugging pending extensive field feedback collection continuing tests obstacles noted end document remarks future update planned later phase outcome TBD final results uncertain revisão unclear looking forward notes conclusion stop period adjustment review halt ending abrupt formatted style confirmed note invalidation rollback