LFD1300T-G2-930-04

Linear LED light source for low-profile or flexible lighting systems. Designed for ambient and accent use in architectural setups, retail spaces, or integrated designs. Emits warm white light in 3000K range (CRI90), functional as direct or indirect illumination depending on installation orientation. Input voltage 24V DC requirement—consistent output when paired with properly regulated driver system. Double-sided adhesive backing; cuttable segments every ~50mm provide modularity during setup. Dimensions approx: total width 13mm, thickness ~2mm (with PCB); flexible polymer build allows it to conform over curved substrates without excessive strain. Connector wiring simple termination via pre-attached leads; termination polarity indications present. Light density concentrated at about ~130 LEDs per meter—uniform diffusion when installed with proper diffuser material options (not included). Rated lumens undisclosed online but corroborates expected range for given wattage specification (~15W/m). System compatibility limited by thermal heat dissipation requirements – passive cooling assumed sufficient but deteriorates under continuous max output without airflow improvements/housing adjustments. No IP listed on archive stub– don't assume ingress protection unless independently confirmed otherwise upon receipt/testing phase QA onsite protocols finalized short-term. Raw notes: Operational voltage: DC24V. Power consumption: est.~15W/m @ full brightness levels individual segment ranges ~50mm typical cutting allowance strips programmable control null/driver-control only no self-integrated dimming onboard LEDs CRI sensed artificial rendition standard chart ATM < compatible apps extendable > w caution environmental.