LFD1300T-G2-865-04

LFD1300T-G2-865-04: versatile LED ribbon/hose/strip for lighting setups, fits into modular systems seamlessly, intended for indoor architectural integration or display applications. Emits high-quality white light with advanced color fidelity (865 daylight spectrum), long operational lifespan. Power draw consistent at nominal load—efficient but ensure proper power source alignment. 24V DC input required—stable voltage key (test before deployment). Comes with standardized connectors allowing faster install in tight configurations. Flexibility suitable for curved surfaces but check space limits; bends only allowable within spec thresholds to avoid damage. Physical build compact but robust casing – silicone-coated exterior protects against minimal dust/moisture issues, though not rated for heavy external exposure—indoor use only. Technical specs: LED type SMD2835. Power consumption ~13W/m avg, variance per end-adjustment setup (verify onsite wattage). Length 5m/reel standard supply (stock SKU may differ). Luminous flux output 1300 lm/m measured at full brightness approx.–confirm against dimming gear compatibility range before usage install phase. CRI >80 always holds manufacturer-specified. Color Temp: ~6500K daytime neutral match synthetic daylight presets exactly calibrate settings where needed fixtures interface properly expanses single-row design distribution uniform first glance tests good no odd spot inconsistencies observed clearance acceptable mounting brackets NOT included confirm accessory codes w/distributor separate lead times bla-bla! Tag notes scratchpad dump raw: Voltage 24V, IP20 rating min, bending radius max ≤60 mm verified manual guidelines, connector type snap-lock adapters double-check polarity wiring before weld outlets final-fit stages test loop QA!