Technical Information
| Item condition |
New |
| Manufacture name |
LF800S-G4-830-10 |
| Brand |
OSRAM
|
| Categories |
Light ribbon-/hose/-strip
|
| Country of origin* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
Packing details
| Packing level 1 |
4052899575790 |
| Packing level 2 |
4052899575790 |
Description
LF800S-G4-830-10: light-emitting module, flexible ribbon format, integrates into lighting systems for linear or accent illumination. Works with 3rd-party drivers in appropriate configs. Part of low-voltage LED setup. Electrical load seems stable at nominal voltage spec ~24V DC input. Power demand measured around 9–10 W/m (watch this, supply needs matching). No dimmer glitching observed under compatible PWM control but unknowns when using other dimming methods. Physically compact strip design but keep bend radius minimal (~5-6 cm) to avoid stress damage on internal circuits/solder points—old notes said "DO NOT EXCEED CURVE LIMIT!" Adhesive backing pre-installed, unsure about heat resistance; check if mounting temp zones might push adhesive failure. Specs section edit-cutoff for reel length limit is listed at 10m max runs powered directly w/o drop-offs past efficiency zone. Might need parallel wiring from PSU if extended lengths required. raw tech notes: Item dimensions approximated as ~5000mm x 8mm x ~2mm thickness per segment, lamp type LED-based SMD array, correlated color temp fixed @830 CCT (warm white range). lumens-per-meter rated near ~870 lm/strip though validation needed under real installs, IP rating absent? looks unprotected for damp/outdoor applyerras