LF700RGBW-G1-840-06 V2

LF700RGBW-G1-840-06 V2, light source component. RGBW flexible strip for illumination or mood systems. Used for linear dynamic color effects; user-programmable color range + white tonal lighting. 12V DC operation, rated max 72W per 5m segment. Current draw varies based on channel usage (approx 6A/unit at peak full load). Driver not included—essential to connect compatible PWM-controller/DC regulator. Cuttable every ~10cm increments via indicated marks, solder pads exposed after cuts. Physical: silicone-coated IP65 housing (dust/splash-resistant). Width ≈14mm; height ≈3mm excluding adhesive layer on back. Conforms well to curved surface applications but requires low-temp clean surface prep before sticking adhesive securely. Technical notes: • RGB+24White LEDs / meter spacing. • Beam angle ~120°. • White diodes = nominal temp spec @4000K±250K mid-range neutral tone output de-rated slightly under continuous operation vs specs some flux decay noted early tests anyway functional overall long runtime OK otherwise periodic maintenance likely LED arrangement stable wiring leads common-ground schematic only easy multi-channel hookup match polarity manually CHECK before power test yeah really connector molex type prefer firmware updatable required when misspec PWM behavior failing not issue final sale datasheets online vendor listing same validatoreseen endmatching mono junction finishes flex sensitive bends protect edges assembly tabsetc conclusion? nominal brightness tiers midpoint burst anchored fits rails guides verified batch SL946 warranty unknown confirm appendix doc HRY03 read fine else yup works done pass teardown there