LF1200S-G5-965-10 L2

LF1200S-G5-965-10 L2 works as a flexible illumination unit for system integrations focused on linear lighting needs, mostly ambient or direct architectural use. Designed to act within ribbon-/hose/-strip category setups and supports modularity in dynamic environments. Can be used with custom power configurations but verify compatibility with voltage range beforehand. Electrical specs rough: Operates at 24V DC nominal input, low current draw per meter. LED density is approximate ~120 LEDs/meter (factory manual unclear, recheck). Power consumption maxes at 9.6W/meter—measure again during active load tests. Dimming possible under PWM controllers, some flicker reported at lower frequencies—but manageable in controlled systems environment. Physical build looks durable enough: Flat flexible strip format with silicone casing rated IP65 (fine for indoor humid spaces or sheltered outdoor use), width feels standard approx.—double-check against reference models if spec-critical! Stuck adhesive backing type—stick failure observed w/ old stock adhesive after prolonged heat exposure EXCEPT if reinforced during install phase. Raw Notes: Length options adjustable @ delivery scales-cuttable @ marked intervals only (factory line stamped), segment voltage uniform across cuts, Optical rating CRI >95 listed online does appear accurate under test, Color temperature labeled 5000K daylight tone but subjective nuances visible, Do NOT apply ≥26V sustained risk of burnout!, thermal performance moderate – not passively cooled appendix not available yet,, lifespan claim 30k hours testing in dusty conditions TBA