LF1100TW-G5-925.940-09 L2

LF1100TW-G5-925.940-09 L2 — light strip component for modular illumination systems. Tunable white output, used in dynamic environments requiring adjustable color temps. Integrates into lighting networks with flexible ribbon-style design. Input voltage range: operates at 24V DC nominal, tolerances within small margins but always check supply consistency, risk of dimming/blink on unstable input. Typical current draw: ~1100 mA per meter max load scenario; effective power rating roughly ~25W/meter, efficiency depend on setup and ambient temp fluctuations. Physical encasing—thin film material composition (polymeric base), IP20 rating likely but confirm dependent use case schema — not sealed/labeled as water-resistant or dustproof post-manufacture alterations may help when necessary. 5-meter standard cut length roll included from factory; can subdivide to fit custom size profiles noting solder breaks required after marked sections only-manufacturer limits these breaks for warranty adherence. Notes: LED type unspecified-probable mid-power diodes, CCT ranges 2700K–4000K tunability spectrum verified, ±10% flux variation across ribbon edges near solder points areas, Ribbon width approx.10mm standardize form factor dimensions, Diffuser compatibility needs extra fittings depends setup aesthetics priority levels, Vendor datasheet implies lifetime hours claim = operational >50k hrs @ norm conditions but recalibrate flux degradation overtime monitoring advised above higher heat zones periods install notes essential closer lookup modules LED follows naming clamp trend wide-scale batches EU origin sources production origin implied Germany actual trace uncertain based code readability internal tags bank registry mentioned online database refs links мэдээл..