LEXIUM INTEGRATED DRIVE Schneider Electric BLCD MOTOR, 24 Ethernet Powerlink interface
Technical Information
| Item condition | New |
| Manufacture name | LEXIUM INTEGRATED DRIVE, BLCD MOTOR, 24 |
| Brand | Schneider Electric |
| Categories |
Standard Electric Motors
|
| Country of origin | DE |
| Harmonized System Code | 8501 5100 00 |
| Model | Rotary current synchronous motor |
| Voltage type | DC |
| Rated current | 4.7 A |
| Rated voltage | 24 V |
| Rated frequency | 50-60 Hz |
| Rated performance at rated frequency | 0 kW |
| Degree of protection (IP) | IP54 |
Packing details
| Packing level 1 | 3606485189031 |
Other Technical data
| Number of phases | 1 |
| Construction type | Other |
| Number of poles | 6 |
| Operating temperature | 0-50 °C |
| Rated rotational speed at rated frequency | 44 1/min |
| Duty cycle | Other |
| Frame size according to IEC | 0 mm |
| Full-load efficiency | 0 % |
| Starting current ratio | 0 |
| Starting torque ratio | 0 |
| Breakdown torque ratio | 0 |
| Voltage anti-condensation heater | 0 V |
| Output power anti-condensation heater | 0 W |
| With positive temperature coefficient resistor (PTC) | No |
| With resistance temperature detector (RTD) | No |
| Intrinsic safety (IS) | None |
| Overload capability | No |
| Cooling method | Air |
| Shaft end type | Other |
| Vacuum pressure impregnation (VPI) | Other |
| Suitable for frequency control | No |
| Bearing | Other |
| Insulation class according to IEC | Other |
| With anti-condensation | No |
| Nominal torque | 12 Nm |
| Power factor | 0 |
Description
Integrated drive for motion control. LEXIUM INTEGRATED DRIVE by Schneider Electric combines the BLDC motor and drive electronics in one unit. Ethernet Powerlink interface for fast communication, used mainly in automated systems and robotics where compact design + reduced wiring complexity is key.
24 V DC power supply supported. Compact but sturdy build, housing designed for industrial environments (vibration/heat). Drive has simple mounting options — solid flange setup, reduced footprint suitable for tight spaces. Not very heavy compared to alternatives.
Raw specs:
- Motor type: Brushless DC (BLDC), integrated multiturn absolute encoder.
- Network: Ethernet Powerlink Interface.
- Voltage input: 24 V DC.
- Category: Integrated Drives.
- Typical application domains: Robotics, industrial automation setups.
- Connectivity extends via standardized fieldbus interface modes only.