When you choose surface-mounted luminaires in commercial or institutional spaces, you’re dealing with the kind of fixture that must reliably perform for 10-15 years without replacement. The category lena lighting surface mounting lamps includes solutions designed for ceiling and wall installation, offering quick fitting, predictable maintenance and consistent brand performance. For instance, Lena Lighting’s Tablo LED line shows models 35 W / 70 W, in 3000 K or 4000 K, with CRI > 80 and SDCM ≤ 3.
In practice: specifying Lena Lighting surface-mounted lamps means you standardise on one manufacturer’s ecosystem, which reduces spares diversity, simplifies procurement and aids lifecycle management.

Lena Lighting Wall & Ceiling Surface Lighting – One Fixture, Many Mounting Options

Under the keyword lena lighting wall and ceiling surface lighting you’ll find luminaires engineered for mounting either on walls or ceilings—ideal for stairwells, corridors, utility rooms, mezzanines. For example: Lena’s Square LED Basic shows a surface-mounted square LED fixture, 260×260×60 mm, luminous efficacy 88 lm/W, IP54, IK08, colour temperatures 3000K/4000K
From a specifier’s view: key parameters include mounting footprint, depth clearance, driver access, ingress/impact protection. Using Lena wall & ceiling surface lighting lets you standardise footprint and service access across differing room types

Lena Lighting Indoor Surface Fixtures – Built for Indoor Use, Ready for Demanding Conditions

The term lena lighting indoor surface fixtures addresses the interior zone where lighting needs are more than decorative—they must meet regulatory lighting standards (for offices, schools, health care). In one specification sheet, the “Point LED” surface luminaire is rated IP44 and LED lifespan L70B50 50,000 h at ta = 25 °C
From procurement: confirm photometric performance (lumen output, uniformity), colour temperature and lifetime (L70, L80), especially since interior retrofit or refurbishment budgets hinge on durability and maintenance cost. Lena indoor surface fixtures provide data on runtime, ingress, and optics to support that.

Lena Lighting LED Surface Luminaires – Efficiency, Life-Cycle & Quality Assurance

Finally, the keyword lena lighting led surface luminaires focuses on the LED-based nature of modern surface mounts—important because efficiency gains, long-life drivers and warranties differentiate premium brands. For example: Tablo LED from Lena lists 35 W or 70 W, luminous flux up to ~9,300 lm (for 70 W / 4000 K)
From a senior buyer’s perspective: metrics such as lm/W, L70 life expectancy, SDCM, CRI, and driver warranty matter. When you specify Lena LED surface luminaires you ensure that those numbers are present, documented and aligning with project-life assumptions.

Buyer Checklist & Specifier Advice

Mounting option: Surface-mounted vs recessed. Check available ceiling clearance, mounting brackets, driver location (remote/integrated).
Photometric data: For example, Tablo LED 70 W / 4000 K → luminous flux ~9,300 lm.For surface fixture Square LED Basic: 13 W/1490 lm at 260×260×60 mm.
Protection & durability: IP/IK ratings matter—Square LED Basic is IP54/IK08; Dione LED Plus surface model is IP65/IK10.
Colour & quality: Choose CCT (3000K/4000K) and ensure CRI > 80, SDCM ≤ 3 for colour consistency (Tablo LED).
Installation & service: Surface mounts easier to instal and maintain than recessed; ensure front driver access, through-wiring capability.
Brand standardisation & spares: Using Lena across surface fixtures simplifies spare driver, lens, diffusion parts.
Common mistakes to avoid: Selecting surface mount without checking depth clearance; ignoring driver thermal rating leading to early failure; mixing brands causes incompatibility of mounting, optics or service.

Wholesale & B2B Supply — Bank of Lamps

For electrical contractors, fit-out specialists, facility managers and procurement teams: the lena lighting surface mounting lamps category is a strong professional choice.
We offer:

Full Lena Lighting surface-mounted (wall & ceiling) series including LED surface luminaires with full tech spec.
Project / volume pricing, logistic support for multi-zone roll-outs ( & EU).
Technical data: datasheets, photometric files, cut-out and mounting dimensions aligned with Lena documentation.
If you need surface-mounted lighting systems backed by technical data, long-life assumptions, installation-friendly design and brand continuity — specifying Lena Lighting via Bank of Lamps gives you a solid foundation for performance and service.