LEDriving® HL 12W 12V P14.5S H1 (2 pcs)

For vehicle lighting systems, the LEDriving® HL 12W 12V P14.5S H1 provides high-efficiency illumination for both enhanced road visibility and better overall light output compared to halogen alternatives. Fits standard vehicle sockets, usable as a direct replacement in H1 configurations. Electrical operation on 12V DC feed with max power consumption of 12W per unit. Designed for compact efficiency in thermal management without dedicated cooling hardware, relies on inherent material dissipation properties during normal usage cycles — check operations against ambient temp variations due to risk of minor output fluctuation. Physical housing utilizes P14.5S base, durable construction supports vibration resistance at automotive-grade levels but avoid excessive handling near mounting areas to prevent possible connector stress or degradation over time. Two units included per pack, single-unit weights low enough for simplified install without balance recalibration necessity in socket bay regions. Technical notes: -Voltage requirement: nominal 12V DC input operating threshold. -Power load rating: max limit at ~12W under typical conditions—periodic verification advised post-installation over extended usage intervals. -Thermal control passive dissipation model lacks active components (radiator/vent designs omitted). -Light configuration suitable for H1 socket interface type only—cross-type compatibility unknown/unverified. -Connector model aligns precisely to P14.5S standard external dimensions guidelines/profiles fitting integrity confirmed tested setups end-only types verified safe ranges applied logged conditions feedback user-load sustainability criteria multipoint thresholds confirmed clear.*