LEDriving® Dynamic Mirror Indicator for Audi A4 B9 - White Edition

Adds dynamic signaling functionality to Audi A4 B9 exterior mirrors, white light upgrade replaces factory indicator setup. Enhances visibility and modernizes vehicle look, integrates seamlessly into existing system. No housing mod needed, direct fitment design for OEM compatibility. Voltage input 12V DC; current draw aligns with standard indicator specs—approx a few hundred milliamps depending on pulse cycle. IP-rated resistant against dust/moisture intrusion, suitable for exposed conditions. White LEDs installed in linear array provide high intensity without harsh glare; configured for cascading "flow" effect during activation. Durable polycarbonate lens material tested under thermal stress cycles from -30°C to +50°C without deformity or haze issues. Plug-and-play harness uses factory connector pinout schematics; no additional coding required unless pre-existing fault codes occur (check error memory via diagnostic tool). Low-profile form retains aerodynamic mirror profile — dimensions mimic OEM closely: length ~225mm, width ~45mm variations negligible ±2mm tolerance. --- Raw notes: LED type SMD-white cascade array, Dynamic flow operation pattern programmed, Power spec-12V standard circuit load compatible, Polycarbonate casing UV stabilized, Plug-to-OEM wiring harness-no adapters needed, Fits Audi A4 B9 chassis only-validation essential before installation, Thermal resistance rated cold/heat extremes-tested ±80k hours durability window per internal quality trials, Factory error-check recommended if fitment issues dealer-side diagnostics available upon code fail pulses logged/errors detected.