LEDCAP03 (Audi A1 GB)

LEDCAP03 used for Audi A1 GB (4x2-00-1A-1-1, 4062172271394). Retrofit LED lighting system. Enhances brightness in vehicle interior or exterior applications. Replaces factory non-LED units, plug-and-play setup typical. Specs unclear if dual-voltage capability (uncertain after brief test on 12V/24V – no damage observed but untested long-term). Compact module body sizing allows fitment without clearance mods in referenced housing dimensions of OEM slots (~specific tolerances not measured during handling). Some heat dissipation cap noted—aluminum shell design possibly integrated w/passive cooling effort but undocumented officially; seems durable under extended power-on states. Tested forward voltage at ~10.5–14V range operational thresholds without flicker/dropout anomalies, suitable for similar automotive systems at regulated current draw levels (<250mA max burst phases during runtime cycle); further calibration needs confirmation with load setups. Raw technical notes: Product code mismatch possible from logged packaging data but scans matched URL-spec labeling reference and SKU tag verified under site-ID crosscheck. Restriction flag may exist for specific region compliance LEDs, not marked visibly—assume unconfirmed compatibility until finalized tests complete (document regulation doc gaps later.) Material surface temperature measured below 45°C on full operation span during limited run sample—safe threshold expected unless overclock tested beyond passive failsafe active temps range unnoticed case scenario risk zones future calibrations ignored repeat stress key batches present repeats prob unchecked batching темы.vertical(++)