When your lighting spec calls for GU10 form-factor lamps that can dim smoothly, run efficiently and behave predictably, Kanlux GU10 dimmable LED lamps deliver. These aren’t “just another LED bulb” — they’re built for retrofit, commercial lighting and serious installations where performance matters.
Kanlux GU10 dimmable models like the IQ-LEDDIM series are designed with dimmer-friendly drivers, accurate colour and retrofit compatibility. For example: the IQ-LEDDIM GU10 7 W provides 570 lm at 2700 K and is explicitly listed as dimmable.
Installers pick these because they fit existing GU10 fittings, avoid rewiring, and maintain control over ambience and load. In short: a straightforward upgrade with fewer risks.
A GU10 lamp isn’t just about light output—it’s about beam control, glare management and load compatibility. Kanlux GU10 dimmable lamps offer proper beam angles (e.g., 110° in the dimmable 7 W model) and high colour rendering (CRI ~95 in the example) for accurate, repeatable results.
That means these lamps work as intended in hospitality, retail, corridors or accent lighting — not just “bright enough”.
Kanlux Retrofit GU10 LED Lamps — Upgrading Without Re-Specifying
If you have existing GU10 halogen or low-voltage spots, Kanlux GU10 dimmable lamps let you swap out the light source and keep the old fitting. Same base, similar dimensions, lower power and improved lifetime.
From the spec sheets: typical models run on 220-240 V AC, have SMD LED modules, proper thermal design. For example: GU10 8 W-CW variant lists 220-240 V, 8 W, 560 lm.
Although not every GU10 model is explicitly listed as dimmable, the “LEDDIM” range is the right selection when dimming is required.
Kanlux Energy-Efficient Dimmable LEDs — Life-Cycle Advantage
Because the GU10 format often appears in dozens of fixtures, lifetime and reliability matter. Kanlux dimmable GU10 lamps are rated for extensive cycles, stable output across batches and predictable light performance. For example: 25,000 h lifetime in the dimmable model
In large installations every replacement is a cost—so you want a lamp that will hold up.
Kanlux Adjustable Brightness GU10 Bulbs — Control Without Compromise
“Dimmable” is only useful if it actually dims well. In the Kanlux IQ-LEDDIM GU10 7 W, the spec lists its dimmable feature, warm-white output and high CRI. That means you get ambience control and visual fidelity.
Tip for specification: Always confirm the dimmer compatibility and minimum load. Choose the “LEDDIM” variant where dimming is mandatory.
GU10 dimmable lamps from Kanlux are primarily designed for indoor use—downlights, track lights, accent spots, hospitality zones. The GU10 7 W dimmable model is rated for indoor installation (indoor use case listed).
When specifying, check beam angle, colour temp, and dimming curve to ensure it meets the scene-lighting requirement
When your lighting spec calls for “Kanlux GU10 dimmable lamp” and substitution is not an option, you need a supplier who delivers the exact brand + spec + documentation. At Bank of Lamps we stock the full Kanlux GU10 dimmable range in our Latvian hub and ship across the EU: Germany, France, Netherlands, Baltics, Spain, Belgium, UK.
You get:
Choose Kanlux GU10 dimmable LED lamps from Bank of Lamps and specify lighting you can install and forget—with confidence in dimming performance, energy savings and long life.