Junction Box HP 80-L

**Function Overview** This component operates as a flexible conduit sleeve, primarily used for routing and protecting electrical cables and wiring within industrial systems. It ensures mechanical safeguarding of conductors from abrasion, impact, or environmental contaminants while maintaining necessary flexibility for cable movements during operation. --- **Material Composition and Durability** Manufactured from polyamide (PA6) material offering high resistance to mechanical stress. The thermoplastic polymer construction provides excellent resilience against oil, grease, common chemicals, and UV exposure—suitable for both indoor and outdoor applications. Maximum operational temperature lies between -40°C to +105°C under static conditions; short-term temperature spikes allowed up to 150°C. Flame retardant properties exist but rating specifics depend on variable testing standards; further inquiry required for UL94 compliance details. --- **Dimensional Specifications and Compatibility** Nominal inner diameter facilitates usage with standard-sized industrial data/power cabling bundles without impediments. Wall thickness designed to balance flexibility against compression/impact resistance. Threading compatibility relevant when anchored in fixed assemblies via connector interfaces—additional attention suggested regarding thread pitch matching during system integration. --- - Not suitable for applications requiring full immersion in liquids over prolonged periods. - Polyamide may exhibit dimensional shifts under continuous heat cycling; allowances must be factored if constrained within precision systems. - Abrasion resistance solid overall but periodic inspection required where constant movement or sharp-edge contact is unavoidable. - Avoid direct contact with strong acids/bases due to potential polymer degradation risks. - Requires proper tension management at both exit/entry points into other enclosures/components—strain relief clamps recommended where applicable.