Technical Information
| Item condition |
New |
| Manufacture name |
Junction Box Abox 160-L |
| Brand |
Spelsberg
|
| Categories |
Surface Mounted Junction Boxes
|
| Country of origin* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
3926 9097 00
|
| Halogen free |
Yes |
| Equipped with |
Clamp |
| Rated insulation voltage Ui |
690 V |
| Sealable |
Yes |
| Max. conductor cross section |
6 mm² |
| Weatherproof |
No |
| Degree of protection (IP) |
IP65 |
| Inlet from the rear |
Yes |
Packing details
| Packing level 1 |
4013902110216 |
| Packing level 2 |
4013902307647 |
| Packing level 3 |
4013902307654 |
Other Technical data
| Mounting method |
Wall-/ceiling mounting |
| Colour |
Grey |
| Width |
180 mm |
| Depth |
91 mm |
| Shape |
Rectangular |
| Surface protection |
Untreated |
| Diameter |
0 mm |
| Length |
180 mm |
| Circuit integrity |
None |
| Operating temperature |
-25-40 °C |
| Material |
Plastic |
| Number of inlets |
12 |
| Explosion-tested version |
No |
| Cover attachment |
Screwed |
| With screening |
No |
| For Ex-zone gas |
None |
| Tackable |
No |
| Type of housing feed-through |
Preembossing |
| For Ex-Zone dust |
None |
| Cover model |
Other |
| Castable |
Yes |
| With casting compound |
No |
| Transparent cover |
No |
| Mounting in the soil |
No |
| Mounting under water |
No |
Downloads
Description
This component regulates fluid flow in hydraulic systems, functioning as a precise control device to maintain system stability and prevent excess pressures. It contributes to safety by controlling discharge characteristics, ensuring optimal performance within defined parameters.
### Material Composition
Constructed primarily from wear-resistant alloy steel with synthetic seals for durability. Surface treatment includes anti-corrosion coating suitable for industrial environments. Rated for use in standard-temperature applications but not high-heat scenarios.
### Operating Parameters
Pressure capacity: supports up to 250 bar with continuous operation load. Flow rate can vary depending on the system design but is tuned specifically for low-viscosity fluids and standard lubrication mediums. Requires proper directional alignment—incorrect placement may cause malfunction or leakage.
- Not compatible with high-viscosity fluids without reduced efficiency risks.
- Seal material degrades if exposed to solvents like acetone.
- Optimal temperature range: -20°C to +80°C (outside this range, potential brittleness or seal compromise).
- Standard thread specifications; confirm compatibility before procurement.