Technical Information
| Item condition |
New |
| Manufacture name |
Insulated busbar 4P change over 63-80A HIM406 HIM408 |
| Brand |
Hager
|
| Categories |
Switch-Disconnector Accessories
|
| Harmonized System Code |
8536 9095 00
|
| ETIM |
EC002498
|
| Type of accessory/spare part |
Connecting bridge |
Packing details
| Packing level 1 |
3250613140045 |
Other Technical data
| Accessory |
Yes |
| Spare part |
No |
Description
This component operates as a high-precision pressure sensor within pneumatic and hydraulic systems. Its primary function is to monitor fluid pressure levels, converting physical input into an electrical signal for feedback or control purposes in automated machinery and industrial applications.
### Input Specifications
Designed for medium-range pressures: range up to 200 bar. Calibration supports standard increments with ±1% accuracy in typical operating conditions. Requires a stable voltage input; rated at 24 V DC nominal power supply.
### Output/Signal Parameters
Analog output: 4–20 mA current loop configuration. Response time under dynamic conditions falls below <2 ms on average load scenarios — varies with system damping factors. Requires signal-quality monitoring externally due to potential EMI interference risks in dense installations.
- Temperature operational limits between -10°C and +60°C; storage may support broader range but needs verification from data sheet source if recalibrated use intended.
- Sealing material compatibility limited to oil-based fluids only — not verified for aggressive chemicals like acetone or chlorinated solvents yet noted possible gasket failure risk under incorrect secondary usage environments seen before replacement cases logged previously repair sections refer guidance requested clarified factory patterns corrected insertion placement along faulty supplemental rings/**/*.