HALOSTAR® 64425 S AX 20W 12V G4 FS1 OSRAM

This component is an LED driver designed to regulate electrical power for compatible LED modules in lighting systems. It ensures consistent current delivery and supports dimming functions where applicable, optimizing energy efficiency and light performance. ### Electrical Specifications Input Voltage Range: Compatible with AC mains — typically 220–240V, dependent on local standards. Output voltage controlled within acceptable ranges for specified LEDs. Power factor correction integrated; stabilizes load curves and reduces harmonic distortion in the circuit. Load Requirements: High compatibility with fixed-output LEDs under normal operation conditions — follow OEM specifications for connected components to avoid mismatch or oversupply that risks damage. ### Mechanical Design & Environmental Constraints Form Factor: Compact enclosure appropriate for integration into recessed installations or lighting housings. Standard mounting holes included; no custom brackets necessary unless stated by system requirements. Operational Lifespan: Rated under standard temperature conditions, but ambient environments exceeding specified limits will reduce performance longevity—check manufacturer's datasheet before installation near high-heat sources (e.g., enclosed luminaire designs). Ingress Protection Rating: Limited resistance to dust ingress; not suitable in direct contact zones exposed to moisture without external sealing provisions. ### Technical Notes / Limitations - Must maintain load within driver capacity thresholds as marked during product setup stages. - Not compatible with older CFL lamps or halogen-based circuits without overcurrent risk. - Some flicker may occur if used outside manufacturer-tested application range — verify prior operating tolerances via testing lab data available online/public records. - Installation must comply strictly by country/state codes regarding wiring safety measures; unlisted adapters create overheating hazard!