GFDT800-G1-825-01

Light element in system. GFDT800-G1-825-01 functions as modular ribbon/strip illumination, adaptable integration role—primary for low-profile brightness in confined layouts or linear accent work. Powered component reliant on system input stability; recommended for indirect installs requiring consistent visuals over extended lengths. Electrical detail: Input voltage at 24V DC, tolerances within ±5%. Requires proper connection to a regulated driver unit. Power consumption listed nominally at ~12W/m at full operation load, must not exceed circuit restrictions when scaling length segments (check spec matching before longer runs). Direct current only — no reversing polarity allowed to avoid damage. Physical size profile compact—total width noted 8mm including adhesive base layer (confirmed factory side measurements). Length configuration ordered per meter increments up to 5m spooling max without repeat gaps visible (continuous strip patterns aligned smoothly). Flexible plastic substrate(s), trimming feature enabled every ~10cm marked zone per OEM cut lines; no bending beyond suggested recommendations under stress test range ≤45°. Raw tech notes: Single source emitting variant – cool white spectrum typical rating 4000K, LED density 120 LEDs/m equidistant arrangement, IP20 casing unsealed – indoor applications specification only, Operational thermal limit approx. +50°C surfaces post sustained use warning verified, Connector micro-fit included standard packaged batch shipping confirmed bank code ref #4062172219433 details intact matched list entry final invoice attachment logged record timestamp OK status all checks passed complete signature processed.