GFDS600-G1-827-01

Used for ambient or accent lighting applications. GFDS600-G1-827-01 light ribbon outputs warm white illumination, compatible with low-voltage systems. Functions in linear setups; flexible strip design suitable for tight or complex installations. 12V DC input power required. Cut points spaced roughly every 5–10 cm (measure exact later). IP rating vague—assume indoors unless stated otherwise. Non-waterproof silicon housing on outer layer, semi-diffused look yet visible LED dots throughout (not true continuous diffusion). Length: ~6000mm total per roll configuration provided—double-check this before quoting the order capacity. LED chips configured to emit at 2700K color temp mastering soft white output with decent CRI (~80+ claimed?). Viewing angle falls near the standard ~120° spread — depends a bit possibly if environmental obstruction present sidewise too maybe accounts slight variants often typical noise tolerance exist amongst norms technically-speaking angles clearly integrated dimmer compatibility timeline runtime expected sure nice feature. Raw Notes: Voltage input requirement = 12V DC. Max run length = unknown without overcurrent limit data verify %. Chip specs unclear count-per-meter expect corrections distributor guide sheet soon uploaded probable firmware nuances hindrance visible connections practical unlikely-safe margins aware max-clear volumes failures thresholds adjoining strips mismatch integrity safeguards connectors something inclusions speed fixes dummy-tested adapters lost drawer bulk validate equipment aid prep w/experienced cable-routing management trim edits material safe cleaner upgrades rusty QA department lazy recent.<|disc_thread|>